15
Child safety control
20 - 60 °C
Set the max. value to limit temperature, e.g. 36 °C for a baby’s bath.
Energy and water saving
4 - 15 l/min
Set the max. flow rate value, e.g. 8.0 l/min.
5 - 200 l
Set the max. value for water quantity, e.g. 80 l.
Note:
The water quantity automatic control must be operated before filling the bath. Operation
applies for one filling of the bath only.
4. Setting the comfort functions for the user and the qualified installer
ð at any point
ð Automatically 10 seconds after the last setting
START
Press for 2 seconds
Water quantity automatic control
00:00 ... 23:59
Second display
Setting the clock
Press for 2 seconds
End
Flow rate
kWh
Energy consumption
Water quantity
Time
Note:
In the “kWh” and “m3” menus, the meters can be reset to ZERO by pressing and holding
down
and together.
Set the clock
Remark:
Re-set after a power cut affecting the DHE..SL (i)
Note:
Press und for 2 seconds à return to factory settings
English
To Next Page
Loading...