STIEBEL ELTRON FFB 1 SL electronic comfort - Menu Guide; Temperature Adjustment; ECO Functionality

13
el e c t ro n i c c o m f or t
3.2 Setting the temperature
Stepless adjustable temperature selection
l 20 to 60 °C
l OFF ð Heating is switched off
Temperature memory push-buttons
For rapid switching between two pre-selected temperatures
lPress for 2 seconds to save the required temperature:
Temperature display flashes once and is saved.
lSelect stored temperature
3.3 Warning displays
Flashing warning light for excess temperature
When the inlet temperature is higher than the desired temperature, e.g. as a result of solar-heated water, the tem
-
perature display flashes and the second display shows the inlet temperature.
Temperature display flashes
Second display – inlet temperature
3.4 ECO function On/Off
ECO function for water and energy saving
The quantity of water flowing through is limited to a maximum value (factory setting 8 l/min, a diffe
-
rent value can be set in the menu).
ECO on ð Symbol in the display
ECO off ð Symbol disappears
3. Menu guide for the user and qualified installer
Bar display to indicate power
Second display
e.g. flow quantity
Temperature memory buttons
M1 and M2
Menu button
Temperature selection (set values)
Backlighting
Error display (see service mod
on the water heater)
3.1 At a glance
Temperature display
Wellness programme
Child safety control
Water quantity automatic control
ECO water and energy saver
Display symbols:
- ECO
-Healthy showering
- Water quantity automatic control
- Child safety control
ECO
ECO
Battery change recommended
English