14
3.5 Water quantity automatic control On/Off
Setting water quantity automatic control
When the pre-set quantity is reached the automatic unit reduces the flow quantity to approx. 4 l/min.
Example: filling a bath 80 l.
When 80 l is reached the flow is reduced to approx. 4 l/min, only a little water continues to flow. The
desired temperature remains constant. For changing the max. water quantity see point „4. Setting the
comfort functions“.
Water quantity automatic control on
ð Symbol in the display
Water quantity automatic control off
ð No symbol in the display
3.6 Healthy showering On/Off
Selecting a wellness programme.
WW
KW
3 min 30 sec 30 sec
WW
KW
3 min
WW
WW - 10 °C
3 min 10 sec 10 sec
WW
KW
Stimulating end to a winter shower with re-warming
Rapid alternate showers to increase fitness, ending with re-warming
Arms and legs are showered in cold water to promote circulation. Showering – beginning
with hands and feet – should be directed towards the body. The process can then be repea
-
ted with warm water.
To harden your body you are advised to end with a cold shower, so that the body initiates a reflex
action to warm itself up.
WW = Warm water
KW = Cold water
3.7 Child safety control On/Off
Setting the child safety control
The variable temperature is restricted to a maximum value. See point „4. Setting the comfort
functions” on changing the maximum value.
Child safety control on
ð Symbol in the display
Child safety control off
ð
No symbol in the display
Note: The last shower programme selected is automatically selected again the next time a button is pressed.
Healthy showering off ð No symbol in the display
2 sec
Healthy showering on ð Symbol in the display
The shower programme is shown for 2 s.
2 sec
4 different wellness shower programmes can be selected for alternate showering
3 min 10 sec 10 sec
20 sec 20 sec
10 sec 10 sec
10 sec 10 sec
To Next Page
Loading...