PHONE:
800-355-4945
WEB:
www.energyproducts.biz
EMAL:
info@energyproducts.biz
4
MOUNTING THE UNIT
SH3-12, SH3-14, SH3-19, SH3-24, SH3-29 & SH3-36
UNIT MUST BE INSTALLED IN A VERTICAL POSITION WITH THE WATER FITTINGS
POINTING DOWNWARD, DO NOT INSTALL UNIT WHERE IT WOULD ROUTINELY
BE SPLASHED WITH WATER OR ELECTRICAL SHOCK MAY RESULT.
1. Leave a minimum of 5” of Clearance on all sides for servicing.
2. Make sure that the Power is Off.
3. Remove the Cover.
4. Mount securely to wall by putting four screws through mounting holes.
5. Screw and plastic wall anchors for mounting on masonry or wood are provided.
To Next Page
Loading...
