INSTALLATION
Installation
12 | VRC-W 400 (E) www.stiebel-eltron.com
Installation drawing with silencer attachment
1486
1340
147
379
D0000085684
≥100
≥700
≥400
≥400
D0000085683
9.3 Transport
!
Material losses
If possible, transport the appliance to the installation lo-
cation in its original packaging.
If the appliance is transported without packaging and
without using a pallet, e.g. to carry it up or down stairs,
its outer casing may be damaged.
To transport the appliance without packaging, first re-
move the front panel of the appliance. See chapter "In-
stallation/ Removing the front panel".
!
Material losses
Never use the air connections as handles for carrying
the appliance.
10. Installation
10.1 Removing the front panel
Remove the front panel before removing the appliance from the
pallet, to avoid damaging the appliance.
D0000040363
1
2
2
1 Fascia
2 Front panel fixing screws
The fascia is fastened to the appliance with locking tabs.
f To disengage the locking tabs, press the grip areas on the
fascia sides.
f Remove the fascia from the appliance.
f Undo both screws securing the front panel at the top of the
appliance.
f Carefully push the front panel upwards by a small amount to
release it from the hooks on which it is engaged.
D0000040364
1
1 Plug on cable from programming unit to appliance
f Carefully raise the front panel by a small amount on the
right-hand side.
To Next Page
Loading...
