STIEBEL ELTRON WPF 13 Operating And Installation Instructions

40
43
RUNTIMES (WPMi)
Pressing PRG displays, in sequence, the
compressor runtime and that of the backup
heating system. Runtimes can only be reset via
a hardware reset.
43
RUNTIMES (WPMiw)
Under parameter runtimes, you can scan
values of the heat pump. These values can
only be reset via a hardware reset.
INFO
RNT COMP HEA Runtime - compressor heating mode
RNT COMP DHW Runtime - compressor in DHW mode
RUNTIME DHC 1 Runtime - DHC1 in heating mode
RUNTIME DHC 2 Runtime - DHC2 in DHW mode
RUNTIME DHC 1 2 Runtimes - DHC1 and DHC2
RNT COMP COO Runtime - compressor in cooling mode
EL OUTPUT TAG kWh
Compressor electrical output in heating mode over the last 24 hours in kWh
TTL EL OUTPUT MWh
Total compressor electrical output in heating mode in MWh
EL OUTPUT TAG kWh
Compressor electrical output in DHW mode in kWh
TTL EL OUTPUT MWh
Total compressor electrical output in DHW mode in MWh

STIEBEL ELTRON WPF 13 Specifications

General

Brand	STIEBEL ELTRON
Model	WPF 13
Category	Heat Pump
Language	English