www.stiebel-eltron.com WPL 33 | 17
INSTALLATION
Fitting casing components
26_03_01_1455
Remove the backing from the adhesive strips on the frame
and on the plastic film.
Secure the plastic film by pressing it onto the standard
appliance.
Seal the gaps around the hooks with fabric tape.
12.2.2 Fitting casing components
2
1
3
1
5
4
26_03_01_1443
1 Side panel
2 Cover
3 Front panel
4 Type plate
5 Back panel
Place the hood on the appliance and secure with two screws.
Hook the side panels and front and back doors onto the
standard appliance. Secure each of these with one screw.
Affix the type plate supplied to top front r.h. or l.h. side of the
side panel where it will be clearly visible.
To Next Page
Loading...
