STIEBEL ELTRON WPM - Menu Description; Programs

OPERATION
Menu
22 | WPM www.stiebel-eltron.com
 I/O CONFIGURATION
 EMERGENCY OPERATION
 RESET
5.2 Menu description
Note
The appliance user can set the appliance parameters de-
scribed in these operating instructions.
The remaining appliance parameters are to be found in
the commissioning instructions for the heat pump man-
ager.
Ask your qualified contractor to set the remaining appli-
ance parameters.
PROGRAMS
Here you can set the times at which the individual programs are
enabled.
 HEATING PROGRAM
 HEATING CIRCUIT 1
 HEATING CIRCUIT 2
 HEATING CIRCUIT 3
 HEATING CIRCUIT 4
 HEATING CIRCUIT 5
 DHW PROGRAM 1
 DHW PROGRAM 2
 PARTY PROGRAM
 HOURS
 HOLIDAY PROGRAM
 HOLIDAYS BEGINNING
 HOLIDAYS ENDING
 PASTEURISATION PROGRAM
 START TIME
 DAYS
 DHW CIRCULATION PROGRAM
 SWIMMING POOL PROGRAM
 SILENT PROGRAM 1
 SILENT PROGRAM 2
Example: Setting a time program
 Navigate to PROGRAMS/ HEATING PROGRAM/ HEATING
CIRCUIT 1.
+
-
26�04�01�0301
MONDAY
MON
MAIN MENU
PROGRAMS
HEATING PROGRAM
HEATING CIRCUIT 1
 Select the period for which you want to set the time program.
You have the following options:
- For each individual day of the week (Monday - Sunday)
- Monday to Friday (Mon - Fri)
- Saturday and Sunday (Sat - Sun)
- The whole week (Mon - Sun)
 Turn the Touch-Wheel clockwise to select another day or a
group of days. Confirm the selection with OK.
07:00 - 20:00
- -:- - - - -:- -
- -:- - - - -:- -
26�04�01�0299
MENU
MAIN MENU
PROGRAMS
HEATING PROGRAM
HEATING CIRCUIT 1
You can set three switching time pairs per day or block of days.
The switching time pairs are shown on the display, to the right
of the clock. Each switching time pair consists of a start time and
an end time.
In this example, only one switching time pair has been pro-
grammed. The switching time pairs that are still free are repre-
sented with dashes for the time slots.
 Use the Touch-Wheel to select one of the free switching time
pairs or the switching time pair that you wish to change.
Confirm the selection with OK.
 Use the Touch-Wheel to select the start or end time that you
wish to change. Confirm the selection with OK.