Need help?Do you have a question about the Stiegelmeyer Evario and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Type | Electric Hospital Bed |
| Trendelenburg/Reverse Trendelenburg | Yes |
| Electric Adjustable Bed | Yes |
| Application | Hospital |
| Adjustable Height | Yes |
| Mattress Options | Various medical mattresses available |
| Wheel Locking System | Central braking system |
Explains how safety information (WARNING, CAUTION, NOTICE) is presented.
Covers safe operation, patient suitability, and electrical safety.
Details risks and precautions for electrical connections and cables.
Specifies limits and rest periods for electric actuator usage.
Important safety notes on handling and securing the LCD handset.
Safety precautions for making bed adjustments to avoid crushing hazards.
Identifies special hazards like fire and electromagnetic interference.
Precautionary measures to prevent fire hazards.
Information on EMC requirements and precautions for electronic devices.
Safety guidelines for using accessories and additional equipment.
Precautions for combining the bed with other electromedical devices.
Important safety notes regarding the use of patient lifts with the bed.
General safety advice for using accessories.
Defines the intended purpose and suitability of the hospital bed.
Outlines where and how the bed should be used for its intended purpose.
Details the LCD handset, its functions, layout, and storage.
Explains the patient control level and available adjustment options.
Details the functions and options available at the medical staff control level.
Outlines the functions accessible by technical personnel.
Describes the Protega and ¾ safety sides for patient protection.
Essential safety information and requirements before initial use.
Safety guidelines related to the environment where the bed is used.
Specific safety information for electric hospital beds, including grounding.
Instructions for safely moving and locking the bed's castors.
Critical safety warnings related to moving and immobilising the bed.
How to lock/unlock bed adjustment functions for safety and patient control.
Steps for locking/unlocking functions via the LCD handset.
Steps for locking/unlocking functions via the external control panel.
How to lock/unlock functions using the control box.
How to lock/unlock functions using the locking box.
How to set the bed to Trendelenburg or Reverse-Trendelenburg positions.
Steps to set Trendelenburg positions using the LCD handset.
Steps to set Trendelenburg positions using the control box.
Steps to set Trendelenburg positions using the external control panel.
Safety precautions and guidelines for using the bed's safety sides.
How to set the bed to the shock recovery position in emergencies.
Steps to set shock recovery position using the LCD handset.
Steps to set shock recovery position using the external control panel.
Steps to set shock recovery position using the control box.
Steps to set shock recovery position using the locking box.
How to set the bed to the CPR position for resuscitation.
Steps to set CPR position using the LCD handset.
Steps to set CPR position using the control box or locking box.
Steps to set CPR position using the external control panel.
Manual procedure for lowering the backrest in an emergency.
Critical safety advice before cleaning and disinfecting the bed.
Essential steps and precautions before beginning the cleaning process.
Procedures and checks required after cleaning the bed.
Critical safety warnings and precautions before performing maintenance.
Critical safety warnings regarding electric shock and crushing hazards during replacement.
Instructions for safely replacing the bed's battery unit.
Step-by-step guide to safely replacing the mains cable.
Instructions for connecting the earth conductor after cable replacement.
Instructions for replacing the LCD handset.
Instructions for replacing the integrated control panel.
Instructions for replacing the control box or locking box.
Details the terminals of the control unit and its replacement.
Procedure for initializing the control system after component replacement.
Steps to initialize the control via the LCD handset.
Steps to initialize the control via the external control panel.
Steps to initialize the control via the control box.
How to program the LCD handset for proper function.
How to program the external control panel.
Table listing common problems, causes, and rectification steps.
Explains fault indications shown on the display and their solutions.
How to acknowledge and reset detected faults on handset/panel.
How faults are indicated on the control/locking box and possible solutions.
How to acknowledge and reset detected faults on control/locking box.
Steps to reset faults using the control box.
Steps to reset faults using the locking box.
To Next Page
