Stiegelmeyer Sicuro pesa User Manual (English)

Questions and Answers:

R
Richard BrownAug 4, 2025
What to do if Stiegelmeyer Medical Equipment handset/drive unit system is not functioning?
- K
  Kyle LarsonAug 4, 2025
  If the handset or drive unit system of your Stiegelmeyer medical equipment isn't working, there are several potential causes to check: * **Mains cable:** Ensure the mains cable is properly plugged in and the green LED is lit. * **Power supply:** Verify that the socket is receiving power, and check the fuse box. * **Plug connection:** Check the plug connections to ensure they are properly inserted. * **Drives locked:** Make sure that the functions are enabled and the drives are not locked. * **Defective components:** If none of these steps work, the handset, mains cable, or control unit may be defective. Inform the operator to arrange for repairs.
N
nschwartzAug 9, 2025
Why is Stiegelmeyer Medical Equipment not working despite proper power supply?
- S
  Steve WilliamsAug 10, 2025
  If your Stiegelmeyer medical equipment isn't working even with a proper power supply, it could be due to the following reasons: * **Control unit overheating:** The control unit may have shut off due to overheating. Observe the maximum duty cycle of ON/OFF 2/18 minutes. * **Defective control unit:** The control unit might be defective. In this case, the operator should be informed to arrange for repairs or replacement of the control unit.
A
Anthony BooneAug 14, 2025
Why does my Stiegelmeyer Medical Equipment alarm sound constantly during adjustment?
- S
  Sandra FordAug 14, 2025
  A constant alarm during adjustment of your Stiegelmeyer medical equipment usually indicates that the battery capacity is depleted. Connect the bed to the mains supply to recharge the battery as soon as possible.
J
John WilsonAug 25, 2025
Why does Stiegelmeyer Medical Equipment operate for only a short time with a charged battery?
- D
  Donna SmithAug 25, 2025
  If your Stiegelmeyer medical equipment operates for only a short time even with a sufficiently charged battery, the battery's service life may have reached its limit. Replace the battery and inform the operator to arrange for repairs.
R
Randall BrownAug 29, 2025
What to do if manual emergency lowering of backrest on Stiegelmeyer Medical Equipment is not possible?
- N
  nguyenleeAug 29, 2025
  If you cannot manually lower the backrest of your Stiegelmeyer medical equipment during an emergency, check the following: * **Bowden cable:** The Bowden cable may be too loose or not secured. Readjust it at the release lever or secure it properly. * **Kinked Bowden cable:** The Bowden cable could be kinked. If so, install a new Bowden cable and inform your operator about any necessary repairs.
J
Jessica Ferguson DVMSep 10, 2025
How to troubleshoot Stiegelmeyer Medical Equipment when operation using battery is not possible?
- E
  Elizabeth ElliottSep 12, 2025
  If operating your Stiegelmeyer medical equipment on battery is not possible, it is likely that the battery is not charged. Connect the bed to the mains supply for approximately 8 hours to charge it.