What to do if manual tilting of Stiegelmeyer Medical Equipment mattress base cannot be blocked?
If the manual tilting of the Stiegelmeyer Medical Equipment mattress base cannot be blocked, it might be due to a Bowden cable that is too short. In this case, adjust the length of the Bowden cable. Alternatively, the Bowden cable might be jammed or not resetting itself. You should rectify the cause, secure the cable, or replace it if necessary.
Why manual tilting of Stiegelmeyer Deka mattress base is not possible?
If the manual tilting of the Stiegelmeyer Medical Equipment mattress base is not possible, it could be because the Bowden cable is too long or has become detached. Adjust the length of the Bowden cable to resolve this. Another possible cause is that the Bowden cable is jammed or kinked. You should rectify the cause, fix it securely, or replace it if necessary.
How to fix manual adjustment of backrest on Stiegelmeyer Deka Medical Equipment?
If the manual adjustment of the backrest on your Stiegelmeyer Medical Equipment is not possible, it might be because the rod that connects the release lever and gas spring is bent or has become detached. To fix this, readjust it at the release lever or secure it.
How to fix manual adjustment of thigh rest on Stiegelmeyer Deka Medical Equipment?
If the manual adjustment of the thigh rest on your Stiegelmeyer Medical Equipment is not possible, it might be because the rod connecting the release lever and gas spring is bent or has become detached. To resolve this, readjust it at the release lever or secure it.
What to do if the handset/actuator system is not working in my Stiegelmeyer Deka Medical Equipment?
First, ensure the mains cable is properly plugged in, and the mains power LED on the control unit is lit. Check the socket and fuse box for power supply. Make sure the connector plugs are correctly inserted. Verify that the actuators are not locked out by enabling the functions. If the issue persists, the handset, mains cable, or control unit may be defective, and you should inform your operator about necessary repairs.
Why is my Stiegelmeyer Medical Equipment not functioning despite proper power supply?
The control unit may have shut down due to overheating. Observe the maximum duty cycle of ON/OFF 2/18 minutes. If the problem continues, the control unit could be defective, and you should inform your operator about necessary repairs.
What to do if the mains control lamp in the control unit of my Stiegelmeyer Deka Medical Equipment does not light up?
First, ensure the electric socket is working properly. If it still doesn't light up, the mains cable might be damaged and needs replacement. If neither of these solutions works, the fuses in the control unit may be defective, and you should inform your operator about any necessary repairs.
What to do if constant alarm sounds during adjustment of Stiegelmeyer Medical Equipment?
The battery capacity is likely depleted. Connect the bed to the mains supply to recharge the lead-acid battery as soon as possible.
What to do if the manual CPR release of backrest is not possible in Stiegelmeyer Medical Equipment?
Check if the Bowden cables are too loose or not attached and readjust at the release lever or secure them. If the Bowden cable is kinked, you should inform your operator about necessary repairs.
Why is battery-powered operation not possible in my Stiegelmeyer Deka Medical Equipment?
The lead-acid battery is likely discharged. Connect the bed to the mains supply for approximately 8 hours to recharge it.
General| Manufacturer | Stiegelmeyer |
|---|---|
| Adjustable Height | Yes |
| Knee Break Adjustment | Yes |
| Side Rails | Yes |
| Electrical Operation | Yes |
| Wheels | Yes |
Defines target user groups and their responsibilities for safe bed operation.
Explains safety warning symbols and icon meanings used in the manual.
Essential safety rules for correct and safe operation of the hospital bed.
Precautions for mains cables, connections, and electrical components.
Guidelines on actuator limits and safe handset handling.
Warnings and measures to prevent crushing or entrapment during bed adjustments.
Information on fire prevention and electromagnetic compatibility requirements.
Defines the bed's intended use and lists conditions where it should not be used.
Detailed description of the bed's parts like chassis, actuators, and safety sides.
Key technical details: dimensions, weight, adjustments, and electrical data.
Essential safety guidelines and checks required before the bed's initial use.
Requirements for the operating environment and specific safety for electric beds.
Procedures and checks required when a new patient uses the bed.
Instructions for extending or shortening the mattress base.
Steps for removing and inserting headboard/footboard infill panels.
Procedures for safely moving, braking, and immobilising the bed.
Step-by-step guides for mechanical adjustments: backrest, thigh, leg, height, tilting.
Overview of electric components, control units, handset functions, and locking.
Instructions for raising and lowering swivelling safety sides.
How to activate the CPR position using handset or locking box.
Manual procedure for rapidly lowering the backrest in critical situations.
Safety guidelines, manual, and machine cleaning procedures.
Service addresses, safety during maintenance, and recommended servicing plans.
Safety info and guides for replacing batteries, handset, control unit.
Guide to identifying and rectifying faults in electric beds.
Guidelines for proper disposal of the bed, components, and gas springs.
Instructions for installing optional accessories like safety sides.
Includes inspection reports, user checklists, and declarations of conformity.
To Next Page
