Stiegelmeyer Deka - Operating Noise; Ambient Conditions; Electrical Data

Product Description
Technical Data
34
Instruction Manual
6.6.6 Operating Noise
The operating noise of an electrically adjustable bed is not more than 47 dB (A).
6.6.7 Ambient Conditions
The following ambient conditions must be maintained:
Ambient Conditions for Storage
Minimum
Maximum
Storage temperature
-10°C
+50°C
Relative humidity
20 %
90 % (at 30°C; non-condensing. At
altitude ≤ 2000m)
Ambient operating conditions
Minimum
Maximum
Ambient temperature
+5°C
+40°C
Relative humidity
20 %
90 % (at 30°C; non-condensing. At
altitude ≤ 2000m)
Air pressure
800 hPa
1060 hPa
6.6.8 Electrical Data
Mains Cable: (coiled, anti-kink, with strain relief)
Type
H05 BQ-F 3 x 1 mm
2
(EPR quality)
Handset (EM1 - EM3)
Type
LINAK HB 7x; HB 8x (no locking function)
LINAK HD 8xx (with integrated locking func-
tion)
Operating voltage
24 V DC
Type of enclosure
IP X6, suitable for automatic washing systems (optional)
Locking Box (EM2 - EM3) (Optional)
Type
LINAK ACC
Operating voltage
24 V DC
Type of enclosure
IP X6, suitable for automatic washing systems (optional)
Control Unit (with integrated rechargeable lead-acid battery)
Types
LINAK CB12L (EM1)
LINAK CB16XX (EM2 - EM3); battery optional
Input voltage
AC 230 V, ± 10 %, 50/60 Hz
Current input
max. 2 A (230V)
Output voltage
24 V DC
Output current
Max. 10 A (electronic monitoring and cut-out)
Duty cycle
Intermittent duty: 2 min ON / 18 min OFF
Classification
Protection class I, EN60601-1-compliant type B device with internal power sup-
ply (if fitted with lead-acid batteries), not for use in explosive atmospheres
Protection category
IP X6, suitable for automatic washing systems (optional)
Lead-Acid Battery (Optional)