WORKSHOP MANUAL
EDITION
PAGE
17 /
124
The routine maintenance schedule includes a series of interventions, distributed according to the
following tables, divided by subject and purpose of the interventions.
[ ...]
Check of all the transmission belts ● ●
Check of the wear of the bearings of all the tension pulleys ● ● –
Check / adjustment of the steering wheel ●
Check and adjustment of the accelerator cable (RPM) ●
Check and adjustment of the air cable (if mounted) ●
Check of the adjustment of the seat and of the steering column ●
Check of the tightening of nuts and screws ● ●
Check of the tightening torque of the wheel nuts ● ●
Check and test of the battery ● ●
Test of the charging system output ● ● –
Cleaning of the battery terminals ● –
Check of the wear of the front axle shafts and bushings
(1)
. ● ● –
General lubrication
(1)
● ●
Check of the tyre pressure ● ● ●
Check of the lighting system ● –
Check of the efficiency of the safety devices ● ● ●
Check of the conditions of all the fuel lines ● ● ● –
Check of the conditions of all the hydrostatic oil hoses ● ● ● –
Check of the electrical system and of the wiring condition ● ● ● –
Check of the motor wiring connectors and users ● ● ● –
Cleaning of the area around the exhaust silencer ● ● –
Check and cleaning of the exhaust system and heat deflector ● ● –
Check and adjustment of the parking brake ● ●
Test driving ● ● ●
Check of the controls ● ● ● –
Check of the smoothness and operation of the steering wheel ● ● ●
Check of the speed check and pedal adjustment ● ● ●
Braking test and check of the hydrostatic stop response ● ● ●
(1)
Emphasize to the user the importance of keeping the wheel hubs controlled and well lubricated,
to avoid premature wear of the drive shafts and hubs.
To Next Page
Loading...
Need help?
General
