Stiga 420 - 0 TECHNICAL DATA TABLE; Type; Model; Engine

[1]
Type
[2]
Model
[3]
Engine
[4]
Engine displacement
[5]
Traction
[6]
Power
[7]
Engine revs
[8]
Electrical System
[9]
Battery
[10]
Fuel
[A]
Unleaded petrol
[11]
Fuel tank capacity
[12]
Engine oil
[13]
Engine oil, service category
[A]
SJ or higher
[14]
Engine oil tank capacity, without lter change
[15]
Engine oil tank capacity, with lter change
[16]
Transmission uid
[17]
Quantity of transmission uid required for uid
change
[18]
Spark plug
[A]
Champion XC12YC or equivalent
[19]
Spark gap
[20]
Tyres
[21]
Tyre pressure
front
rear
[22]
Cutting height
[A]
For the cutting height, please refer to the "Technical
Data Table" in the cutting device assy manual.
[23]
Forward travel speed (indicative)
[24]
Reverse travel speed (indicative)
[25]
Weight
[26]
A = Length
[27]
B = Pitch
[28]
C = Height
[29]
D = Width
[30]
Measured sound power level
[31]
Uncertainty
[32]
Guaranteed sound power level
[33]
Sound pressure level
[34]
Uncertainty
[35]
Vibration value in the driver's seat
[36]
Uncertainty
[37]
Vibration value in the steering wheel
[38]
Uncertainty
[39]
ACCESSORIES AVAILABLE ON REQUEST
[40]
Description
[41]
Trailer
[42]
Fertilizer spreader
[43]
Grass and leaf collector
[44]
Rake
[45]
Snow chains
[46]
Mud / Snow wheels
[47]
Cutting device assy
[48]
Front harrow
[49]
"Shredder
[50]
Snow thrower
[51]
Front sweeper
[52]
Blade type snow plough
[53]
Aerator/scarier
[54]
Rear wheel counterweights
[55]
Rear lifting assembly for accessories
[56]
(**) For 2WD models, counterweights must be
installed on the rear wheels.
[57]
TABLE FOR CORRECT ACCESSORY COMBINA-
TIONS
[58]
REAR ACCESSORIES
[59]
FRONT ACCESSORIES
[60]
Accessory
[61]
(***) For 2WD models, when the cutting devi-
ce assies (type 110C E, 110C E QF, 125C E
QF) are installed at the same time as the trailer,
counterweights must be installed on the rear wheels.
0 TECHNICAL DATA TABLE
EN
ENGLISH
(Translation of the Original Instructions)