Why do my Stiga Lawn Mower Accessories have abnormal vibration and/or irregular cutting?
If your Stiga Lawn Mower Accessories are experiencing abnormal vibration or irregular cutting, it could be due to loose parts. Ensure you tighten all fastening devices. The issue could also stem from damaged cutting components. In this case, you should sharpen and balance the blades, and check the alignment of the blade shafts.
What to do if Stiga 95 Combi EL QF cutting means do not engage or stop promptly?
If the cutting components of your Stiga Lawn Mower Accessories fail to engage or disengage promptly, it may be due to a worn or broken control belt. Replacing the control belt should resolve this. Alternatively, the blade connection belt may be worn or broken, requiring its replacement.
How to fix no cutting height adjustment on Stiga 95 Combi EL QF?
If there's no cutting height adjustment on your Stiga Lawn Mower Accessories, it may be due to an electric motor malfunction. Check the electric connection and replace the electric motor if necessary.
What to do if the blade locking device is triggered with blades still rotating on Stiga 95 Combi EL QF?
If the blade locking device on your Stiga Lawn Mower Accessories has been triggered while the blades are still rotating, it indicates a malfunction of the locking devices. You should replace the locking device and adjust the cable.
How to fix a worn belt protection canvas on Stiga Lawn Mower Accessories?
A worn belt protection canvas on your Stiga Lawn Mower Accessories is typically due to wear and/or contacts with other elements. The solution is to replace the belt protection canvas.
Specifies the overall size of the cutting unit.
Measurement of the cutting unit's length.
Measurement of the cutting unit's height.
Measurement of the cutting unit's width.
The mass of the cutting unit in kilograms.
The minimum adjustable height for cutting grass.
The maximum adjustable height for cutting grass.
The effective width covered during grass cutting.
Procedure for adjusting cutting height manually.
Procedure for adjusting cutting height electrically.
Lists machine models compatible with this accessory.
Part numbers for replacement cutting units.
Guidance on interpreting symbols and structure within the manual.
Information on internal cross-references and figure callouts.
Initial safety warnings and general instructions for use.
Essential steps and checks before operating the machine.
Safety measures and precautions while operating the machine.
Safety considerations for upkeep, storage, and moving.
Guidelines for safe and environmentally responsible operation.
Overview of the cutting unit's function, intended and improper uses.
Explains the meaning of safety symbols on the machine.
Details found on the machine's identification plate.
Lists and illustrates the main components of the cutting unit.
Steps for safely removing the unit from its packaging.
Detailed procedure for attaching the cutting unit to the mower.
Instructions for safely removing the cutting unit from the mower.
How to set the desired cutting height for grass.
Operation of the knobs for unit positioning.
Use of levers to release the unit from service position.
Actions to perform before starting the cutting process.
Mandatory safety inspections before each use.
Procedures for starting the machine and performing cutting tasks.
Steps to follow after completing the cutting job.
Overview of routine maintenance benefits and principles.
Steps to put the unit in a suitable position for cleaning and maintenance.
Ensuring all fasteners are securely tightened.
Instructions for cleaning the underside of the cutting unit.
Procedures for checking and replacing worn or damaged cutting blades.
How to inspect and replace the drive belt for the cutting tools.
General| Cutting width | 95 cm |
|---|---|
| Cutting height range | 25-85 mm |
| Quick Flip | Yes |
| Material | Steel |
| Compatibility | Stiga Park Pro, Park |
| Type | Front mower |
| Cutting method | Combi - Mulching, Rear Discharge |
To Next Page
