EN - 5
Stop.
6. USING THE MACHINE
The safety regulations to follow are described in
chap. 2. Strictly comply with these instructions to avoid
6.1 PRELIMINARY PROCEDURES (Fig.16)
Do this when the blade is stationary.
6.1.1 (Fig.17)
6.1.2
NOTE
a.
collection in the grass catcher (Fig.18)
b.
discharge onto the ground: (Fig.19)
1.
c. (Fig.20)
6.1.3 Cutting height adjustment (Fig.21)
6.1.4 Handle inclination adjustment Fig.8, Fig.12)
6.2 SAFETY CHECKS
6.2.1
Object Result
Grips
Handle
Blade
Rear discharge guard;
grass catcher
Good condition. No
Control lever
forcing and should
the neutral position.
(not loose). Not
.
Machine
vibrations. No
Action Result
1. Start the machine (par.
6.3).
2.
control (Fig.29).
1. The blade should
move.
2. The lever should
neutral position, the
If any of the results fail to match the indications
provided in the tables, do not use the machine! Contact
necessary.
6.3 (Fig.23
÷25)
Ignition of the motor simultaneously engages the
blade.
6.4 OPERATION (Fig.26)
IMPORTANT
rting it.
6.4.1 Grass cutting (Fig.27, Fig.28)
NOTE
cutting height considering the conditions of the
6.4.2 (Fig.29, Fig. 30)
6.5 STOP (Fig.29)
The blade will continue to rotate for a few seconds
motor.
IMPORTANT
|
To Next Page
Loading...
