EN - 6
•
•
•
• Before adjusting the cutting height.
•
6.6 AFTER OPERATION (Fig.31
÷33)
1.
IMPORTANT
the machine is unused or left unattended.
7. MAINTENANCE
The safety regulations to follow are described in
chap. 2. Strictly comply with these instructions to avoid
Before conducting any inspections, cleaning or
maintenance/adjustment interventions on the machine:
• Stop the machine.
• R
children or unauthorised persons).
• Remove the battery.
•
come to a complete stop.
• Allow the motor to cool before
storing in an enclosed space.
•
gloves and goggles.
• Read the relevant instructions.
7.1 BATTERY
7.1.1
a.
b.
c.
Setting a cutting height that is too
NOTE
.
7.1.2 (Fig.31
÷33)
NOTE
NOTE
7.2 CLEANING (Fig.34)
7.2.1 Cleaning the machine (Fig.35
÷38)
7.2.2
IMPORTANT
7.2.3 Cleaning the grass catcher (Fig.39)
7.3 BLADE (Fig.40
÷43)
removed and the blade is completely stationary. Bear in
blade can still move.
balancing, repairing, reassembly and/or replacing) are
special tools; for safety reasons, these jobs are best
carried out at a Specialised Centre.
are replaced, together with its own screws in place to
preserve balance.
IMPORTANT
Given product evolution, the blade listed in the “Technical
8. STORAGE
To Next Page
Loading...
