What does it mean if icon fig. 12.E stays on and the battery LEDs 2 and 5 flash on my Stiga Lawn Mower?
If the icon fig. 12.E stays on and the battery LEDs 2 and 5 flash, it indicates a current overload from the battery. This could be due to excessive working conditions or a slope that is too steep. Reduce the travel speed and check the gradient of the terrain you are working on.
What to do if [Push-button panel Type I] The icon fig. 12.E stays on and the battery LEDs 1 , 2 and 4 flash [Push-button panel Type II] The icons fig. 12.E and fig. 12.N stay on and the battery LEDs 1, 2 and 4 flash on my Stiga Lawn Mower?
If the icon fig. 12.E stays on and the battery LEDs 1, 2 and 4 flash (or icons fig. 12.E and fig. 12.N stay on and the battery LEDs 1, 2 and 4 flash), it indicates overheating of the drive motor. This can be due to the drive motor being under strain, a slope that is too steep, or excessive mud on the wheels. Reduce the travel speed, check the gradient of the slope, and ensure the wheels are not blocked and clean them if necessary.
What to do if [Push-button panel Type I] The icon fig. 12.E stays on and the battery LEDs 1 , 2, 4 and 5 flash [Push-button panel Type II] The icons fig. 12.E and fig. 12.O stay on and the battery LEDs 1, 2, 4 and 5 flash on my Stiga Lawn Mower?
If the icon fig. 12.E stays on and the battery LEDs 1, 2, 4 and 5 flash (or icons fig. 12.E and fig. 12.O stay on and the battery LEDs 1, 2, 4 and 5 flash), it means the machine was started with the drive pedal not released (not in neutral position). Turn the machine off and repeat the starting procedure only after making sure that the drive pedal is in neutral (pedal released).
What to do if [Push-button panel Type I] The icon fig. 12.E stays on and the battery LEDs 1 and 3 flash [Push-button panel Type II] The icons fig. 12.E and fig. 12.N stay on and the battery LEDs 1 and 3 flash on my Stiga EXPERIENCE e-Ride C500?
If the icon fig. 12.E stays on and the battery LEDs 1 and 3 flash (or icons fig. 12.E and fig. 12.N stay on and the battery LEDs 1 and 3 flash), it indicates the cutting means motors are overheating due to heavy working conditions. Turn the machine off, wait at least 5 minutes, and then restart it. You can also reduce the travel speed or increase the cutting height.
What to do if [Push-button panel Type I] The icon fig. 12.E stays on and the battery LEDs 1 , 2, 3 and 5 flash [Push-button panel Type II] The icons fig. 12.E and fig. 12.O stay on and the battery LEDs 1, 2, 3 and 5 flash on my Stiga EXPERIENCE e-Ride C500 Lawn Mower?
If the icon fig. 12.E stays on and the battery LEDs 1, 2, 3 and 5 flash (or icons fig. 12.E and fig. 12.O stay on and the battery LEDs 1, 2, 3 and 5 flash), it indicates the transmission engagement/disengagement lever is in the disengaged position. Check the position of the transmission engagement/disengagement lever and, if necessary, return it to the engaged transmission position.
What to do if the icon fig. 12.E stays on and the battery LEDs1, 3 and 5 flash on my Stiga EXPERIENCE e-Ride C500 Lawn Mower?
If the icon fig. 12.E stays on and the battery LEDs 1, 3 and 5 flash, it means the cutting means motors are stalling due to heavy working conditions. To resolve this: 1. Reduce the travel speed. 2. Increase the cutting height. 3. Remove any obstructions hindering the rotation of the cutting means. 4. Clean the cutting-means assembly if it is full of grass.
What to do if [Push-button panel Type I] The icon fig. 12.E stays on and the battery LEDs 2 and 4 flash. [Push-button panel Type II] The icons fig. 12.E and fig. 12.N stay on and the battery LEDs 2 and 4 flash. on my Stiga EXPERIENCE e-Ride C500?
If the icon fig. 12.E stays on and the battery LEDs 2 and 4 flash (or icons fig. 12.E and fig. 12.N stay on and the battery LEDs 2 and 4 flash), it indicates overheating/sub-heating of the battery due to heavy working conditions or unsuitable environmental conditions. Reduce the travel speed, increase the cutting height, and ensure you are working in an environment suitable for the machine's operational conditions.
How to fix a Stiga EXPERIENCE e-Ride C500 Lawn Mower that won't switch on?
If your Stiga Lawn Mower won't switch on, the most likely cause is a low battery. To resolve this, charge the battery.
Why is my Stiga EXPERIENCE e-Ride C500 Lawn Mower cutting irregularly?
Irregular cutting with your Stiga Lawn Mower can be due to a few reasons. It could be that the cutting blades need sharpening, in which case you should contact an Authorized Service Center. Alternatively, you might be moving too fast for the grass height, or the cutting assembly might be full of grass. Try reducing your forward speed, increasing the cutting height, waiting for the grass to dry, and cleaning the cutting assembly.
What to do if my Stiga EXPERIENCE e-Ride C500 Lawn Mower has unusual vibrations?
If you notice unusual vibrations while using your Stiga Lawn Mower, it could be due to incorrectly balanced or loose cutting blades, loose parts, or possible damage. It is recommended to contact an authorized service center for verification, replacements, or repairs.
General| Power Source | Battery |
|---|---|
| Battery Type | Lithium-ion |
| Battery Voltage | 48 V |
| Battery Capacity | 40 Ah |
| Motor | Brushless |
| Cutting Width | 84 cm |
| Cutting Height Adjustment | 7 Positions |
| Cutting Height Adjustment Type | Manual |
| Drive | Rear-wheel drive |
| Collector Capacity | 240 L |
| Cutting Height | 25-80 mm |
| Run Time | 60 minutes |
| Charging Time | 8 hours |
To Next Page