EasyManua.ls Logo

Stiga G1200 - User Manual

Stiga G1200
150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Questions and Answers

  • J
    Jason VasquezAug 8, 2025
    Why is my Stiga Lawn Mower robot so noisy and vibrating?
    • L
      Leslie AndersonAug 8, 2025
      Your Stiga Lawn Mower robot may be noisy and vibrating due to several reasons: * Damaged cutting disc or blades: Replace the damaged components. * Cutting device blocked by residues: Switch off the lawn mower robot in safety conditions and unlock the cutting blade. * Unexpected obstacles: Switch off the lawn mower robot in safety conditions, remove the obstacles and restart the robot lawn mower. * Electric motor failure: Replace the motor, contact the nearest authorized service centre. * Grass too tall: Increase the cutting height. * If none of the above, first mow the area with a normal lawnmower.
  • M
    Mark DelgadoAug 13, 2025
    What to do if the charging base light doesn't turn on when the Stiga G1200 Lawn Mower robot is out of the base?
    • L
      Lisa BaileyAug 13, 2025
      If the charging base light doesn't turn on when the robot is out of the charging base, check that the power supply unit is plugged in correctly and check the integrity of the power supply connection cable. It may be due to the missing supply voltage or a fault in the charging base.
  • J
    James SullivanAug 18, 2025
    How to fix Stiga Lawn Mower robot when it doesn't position itself properly in the charging station?
    • B
      brennanamberAug 18, 2025
      If your Stiga Lawn Mower robot isn't positioning itself correctly in the charging station, it could be due to: * Incorrect position of the perimeter cable: Check the connection of the charging station. * Ground next to the recharging base has collapsed: Restore the correct positioning of the charging base.
  • A
    Amber LynchAug 23, 2025
    Why does the charging base light turn on slowly for my Stiga G1200 Lawn Mower?
    • S
      Susan MorrisAug 23, 2025
      A slowly turning on charging base light indicates that the perimeter cable is not connected or is broken. To solve this, check the installation and repair the break.
  • J
    John HayesAug 27, 2025
    What causes abnormal behavior around perimeter obstacles for the Stiga G1200 robot?
    • M
      Mitchell PayneAug 27, 2025
      If your Stiga Lawn Mower robot is behaving abnormally around perimeter obstacles, it's likely due to the perimeter cable being laid in the wrong way. Reposition the perimeter cable correctly (clockwise).
  • J
    John ChanSep 2, 2025
    What does it mean when the charging base light turns on with quick flashing on Stiga G1200 Lawn Mower?
    • T
      Theresa MitchellSep 2, 2025
      If the charging base light turns on with quick flashing, the perimeter cable is too short or there is a fault in the charging base. Check that the length of the perimeter cable is greater than indicated.

Summary

Safety

Safe Operating Procedures

Guidelines for safe operation, training, and preparation before use of the machine.

Operation

General information on operating the machine and maintenance procedures.

Stopping and Turning Off

Instructions on how to safely stop and turn off the robot lawn mower.

Installation

Criteria for Installing the Perimeter Cable

Guidelines and minimum distances for installing the perimeter cable around the garden.

Installation of the Perimeter Cable

Step-by-step guide for laying and securing the perimeter cable with pegs.

Charging Base Installation

Instructions for correctly positioning and installing the charging base.

Operation

Maintenance

Replacement of the Cutting Blades

Step-by-step instructions for replacing the cutting blades on the robot lawn mower.

Troubleshooting

Stiga G1200 Specifications

General IconGeneral
BrandStiga
ModelG1200
CategoryLawn Mower
LanguageEnglish

Related product manuals