Need help?Do you have a question about the Stiga GARDEN 8211-0202-11 and is the answer not in the manual?
General| Brand | Stiga |
|---|---|
| Model | GARDEN 8211-0202-11 |
| Category | Lawn Mower |
| Language | English |
Indicates potential personal injury or property damage if instructions are not followed.
Explains symbols found on the machine for care and attention during use.
Avoid starting engine before assembly measures are completed to prevent injury.
Guides installation of the steering wheel and use of shim washers for play compensation.
Lists items included in the plastic bag with the machine.
Instructions for charging, storing, and connecting the 12V maintenance-free battery.
Specifies correct air pressure for front and rear tyres.
Details parallel alignment adjustment and installation of Multiclip/Collector.
Instructions for assembling the grass collector and its ejector tube for safe use.
Lever for adjusting cutting deck height, with five positions from 35 to 75 mm.
Lever to engage or disengage the cutting blade and activate the blade brake.
Combined pedal for braking and clutching, with three positions for drive engagement.
How to engage and disengage the parking brake to lock the brake pedal.
Control for engine speed and choke function for starting from cold.
Lever for selecting forward gears, neutral, or reverse, requiring clutch pedal use.
Ignition lock for starting/stopping the engine with STOP, OPERATING, and START positions.
Permitted uses include mowing, grass/leaf collection, and grass/leaf transport with accessories.
Describes the machine's safety system components and their function.
Steps for starting cold/warm engines using throttle, brake, and starter key.
Steps to safely stop the engine, including blade disengagement and key removal.
Procedures for safely fueling the tank and checking engine oil levels.
Advice on preparing for mowing and achieving optimal 'Multiclip effect'.
Precautions for operating the machine on slopes to prevent tipping or loss of control.
Conditions required before performing any servicing on the engine or cutting deck.
Schedule and procedure for changing engine oil, including capacity and type.
Locations and frequency for applying grease to the front axle and steering pinions.
Cleaning and replacement procedures for foam and paper air filters.
Importance of cleaning cooling fins and air intake for engine longevity.
Procedure for checking, cleaning, and replacing the spark plug, including gap setting.
Adjustment steps for drive belt slip and brake lining.
Step-by-step guide to removing the cutting deck, including safety precautions.
Procedures for replacing V-belts for the cutting deck and transmission.
How to adjust the blade brake to ensure it is flush with the belt pulley.
Guidance on proper blade sharpening techniques and using genuine spare parts for replacement.
Emphasis on using genuine STIGA spare parts for safety and function.
To Next Page