To Next PageTo Next Page
Need help?Do you have a question about the Stiga GGP Silex 360-G and is the answer not in the manual?
General| Working Width | 36 cm |
|---|---|
| Weight | 27 kg |
| Tines Diameter | 245 mm |
| Number of Tines | 4 |
| Tine Type | Metal |
| Starter Type | Recoil |
| Engine | GGP |
| Tilling Depth | 200 mm |
Indicates important text for safety or machine damage if instructions are not followed.
Warns about the inherent danger of rotating blades during operation.
General safety rules for tiller operation, user responsibility, and precautions.
Highlights dangers of petrol, including storage, filling, and ignition sources.
Pre-operation checks including removing foreign objects and checking machine condition.
Guidelines for operating the tiller safely on different terrains and conditions.
Step-by-step instructions for installing the tiller's handle.
Instructions for installing the auxiliary wheel.
Instructions for installing the depth skid.
Explains the function of the drive control lever for rotor engagement and forward motion.
Describes the throttle control for engine RPM, speed adjustment, and stopping.
Explains the purpose of the handle grips for operating the machine.
Details the fuel cap's function and importance of closing it during operation.
Emphasizes the necessity of the protective grille and warns about hot surfaces.
Instructions for checking and filling engine oil, with a warning about hot oil.
Explains the auxiliary wheel's purpose for transport and removal before use.
Warns about the gearbox becoming extremely hot during operation.
Highlights the danger of rotors during operation and their function.
Identifies the starter handle for engine ignition.
Explains the depth skid's role in machine stability and shifting positions.
Guidelines for safe petrol handling, filling, and storage.
Instructions for checking and topping up engine oil level, including a critical warning.
Step-by-step guide for starting the engine, including notes on starter handle use.
How to engage the rotor and tilt the machine for soil cultivation.
Procedure for stopping the rotary cultivator using the throttle control.
Advice on working depth, soil conditions, and initial break-in period for new machines.
Guidelines for storing the rotary cultivator in a dry place.
Warnings about repairs by dealers and disconnecting the spark plug before maintenance.
Schedule for routine checks before and after operation, and at set intervals.
Detailed instructions for cleaning and replacing the air filter, with warnings.
When to replace the spark plug and specifications for gap and type.
Procedure for changing engine oil, including timing and safety warnings.
Methods for cleaning the machine, with warnings against high-pressure washing.
Initial troubleshooting guide for common problems like difficulty starting.
Information on using authorized service stations for repairs and using genuine parts.
Strict requirement to use only genuine spare parts for safety and warranty.
States warranty period is according to relevant laws.
Lists common exceptions to the warranty coverage.
