Need help?Do you have a question about the Stiga JB 55 and is the answer not in the manual?
General safety advice before using the tiller, emphasizing reading instructions and keeping children away.
Checks and preparations before starting work, including foreign objects and general condition.
Safe operating practices, including terrain, lighting, supervision, and protective gear.
Lists parts of the tiller and information on the data plate.
Instructions for fitting the steering mechanism using bolts and nuts.
Instructions for fitting the splashguards using nuts and bolts.
Guidance on fitting the support wheel, advising not to overtighten the nut.
Instructions for filling the engine with 0.7 L of SAE 10W40 oil.
Steps for fitting rotors and side rollers, emphasizing cotter lock.
Guidance on filling the fuel tank with unleaded petrol and notes on petrol storage.
Step-by-step instructions for starting a cold or warm engine, including choke and throttle.
How to operate the tiller in forward gear using the clutch and gear controls.
How to operate the tiller in backward gear, emphasizing correct control usage.
Procedure for stopping the tiller, involving throttle, choke, and petrol cock.
Tips for efficient operation, rotor adjustment, working depth, and soil conditions.
Schedule for regular maintenance checks before and after use, and every 20 hours.
Instructions for draining fuel, referencing safety section 2.4.
How to clean or replace the air filter, with a warning about flammable liquids.
Step-by-step guide for changing the engine oil, including warm-up and level check.
Instructions for cleaning the tiller, including brushing, wiping, and flushing.
Procedure for replacing the drive belt, including cover removal and adjustment.
Steps to adjust the clutch wire tension for proper operation and spring extension.
Steps to adjust the gear wire tension for correct play in the handle.
Common faults, their reasons, and procedures for fixing them, such as starting issues or engine power loss.
Lists key specifications of the tiller, such as weight, engine type, power, and dimensions.
Manufacturer's declaration of conformity with EEC directives and consulted standards.
To Next Page
General
