Do you have a question about the Stiga MULTICLIP 46 S and is the answer not in the manual?
Deck Material | Steel |
---|---|
Engine Displacement | 123 cm³ |
Cutting Height Adjustment | Centralized |
Cutting Method | Mulching |
Handlebar | Ergonomic |
Wheels | 200 mm |
Warning to read the instruction and safety manual before using the machine.
Warning to keep onlookers at a distance due to potential flung objects.
Warning against inserting hands or feet under the deck during operation.
Warning to remove spark plug cable before any repair work.
How to fold and attach the lower and upper parts of the lawnmower handle.
Information about battery electrolyte and initial charging for the Multiclip 46 SE.
General preparation steps before starting the lawnmower.
Instructions on filling the engine crankcase with the correct type and amount of oil.
Procedure for checking the engine oil level using the dipstick before operation.
Warnings about refueling while the engine is hot or running, and proper fuel tank filling.
Step-by-step guide to starting the engine for Briggs & Stratton models.
Step-by-step guide to starting the engine for Honda models.
How to engage and disengage the mower's drive system using the clutch loop.
Procedure for safely stopping the engine, with a warning about hot parts.
Rules for achieving optimal MULTICLIP cutting effect, like engine speed and blade condition.
Instructions on how to adjust the cutting height on front and rear wheels.
Safety rules for performing maintenance, including switching off the engine and removing the spark plug cable.
Guidelines for cleaning the lawnmower, especially the underside, and avoiding high-pressure washers.
How to clean the engine's cooling system, including cylinder cooling flanges and air intake.
Instructions for lubricating the drive shaft at the glide bearings at least once per season.
Steps for changing the engine oil, including when and how to drain and refill.
Procedures for cleaning and maintaining air filters for different engine types.
Guidance on cleaning the spark plug, setting the gap, and when to replace it.
Information about battery charging, potential issues with 'dead' batteries, and charging procedures.
Steps for preparing the lawnmower for winter storage, including fuel tank and cylinder treatment.
How to adjust the clutch cable to fix drive engagement issues or slipping.
Safety precautions, blade replacement, tightening torque, and using genuine spare parts.
Recommended methods for sharpening blades and the importance of balancing after sharpening.
Information on obtaining genuine spare parts from service workshops and the STIGA website.