To Next PageTo Next Page
Need help?Do you have a question about the Stiga SNOW FLAKE and is the answer not in the manual?
General| Brand | Stiga |
|---|---|
| Model | SNOW FLAKE |
| Category | Snow Blower |
| Language | English |
Read instructions carefully, learn controls, and correct use of the machine.
Check area, dress properly, handle petrol safely, adjust auger height.
Keep clear of moving parts, drive carefully, handle foreign objects.
Tighten nuts/screws, use genuine parts, store safely, cool engine before storage.
Lists items included in the packing for the snow thrower.
Instructions for removing the snow thrower and parts from the carton.
Steps to correctly assemble the handle of the snow thrower.
Instructions for assembling the adjustment lever mechanism.
Steps for mounting the snow discharge chute onto the machine.
Attaching the control knob to the gear lever assembly.
Checking and adjusting control wires before initial use.
Procedure for checking and setting correct tyre air pressure.
How to start and stop the engine using the stop switch.
Using the choke for starting a cold engine.
Using the primer to assist starting a cold engine.
Correct procedure for using the ignition key to start the engine.
Manual cord start procedure with rewinding.
How to check the engine oil level using the dipstick.
Location and use of the filler cap for petrol.
Location of the plug for draining engine oil.
Activating the electric starting motor.
Connecting the cable for the electric start system.
Controlling the machine's 6 forward and 2 reverse gears.
Engaging the wheels for driving the snow thrower.
Engaging the auger and discharge fan.
Adjusting the deflector to control snow discharge direction.
Changing the direction of the discharged snow.
Setting the height of the auger housing using the shoes.
Read instructions, use safety goggles, and understand warning labels.
Fill engine with oil, check oil level, and use correct oil type.
Use lead-free petrol, store safely, fill outdoors, and avoid smoking.
Procedures for starting the engine using the manual pull-start.
Procedures for starting the engine using the electric start motor.
How to safely stop the engine and the entire machine.
Warming up the engine and setting the chute deflector.
Best practices for operating the snow thrower efficiently.
Checking for damage, cleaning, and preparing for storage.
Step-by-step guide for changing the engine oil.
Procedure for checking, cleaning, or replacing the spark plug.
Information on carburetor adjustment and service.
Lubricating the discharge flange and adjustment lever worm gear.
Lubricating the auger shaft and its nipples.
Checking and refilling the worm gear lubricant.
Notes on parts not requiring lubrication and rust protection.
Adjusting the scraper blade as it wears down.
Checking and adjusting the drive belts for proper tension.
Specific steps for adjusting the auger drive belt tension.
Instructions for replacing the auger and driving belts.
Setting the correct distance between the belt guide and belt.
Adjusting control wires after belt maintenance.
Troubleshooting and checking the friction wheel.
Procedure for replacing the friction wheel on specific models.
Procedure for replacing the differential on specific models.
Procedure for replacing the shear bolts on the auger.
Measures for storing the snow thrower for over 30 days.
Guidance on repairs, service, and using genuine spare parts.
Details on warranty coverage, period, and exclusions.
