To Next PageTo Next Page
Need help?Do you have a question about the Stiga SP 386 and is the answer not in the manual?
Guidance on understanding manual symbols, notes, and warnings.
Information on how figures, components, and titles are referenced.
Emphasizes operator training and familiarization with controls.
Details required personal protective equipment (PPE) and fuel handling.
Safe operation, work area considerations, lighting, and supervision.
Importance of regular maintenance and correct storage.
Guidelines for responsible machine use and disposal.
Describes the chainsaw's purpose and design.
Specifies authorized uses like felling and bucking trees.
Lists forbidden uses and their consequences.
Identifies the intended user as a consumer/non-professional.
Explains the meaning of various safety symbols on the machine.
Details the information found on the machine's identification label.
Identifies and describes the main parts of the chainsaw.
Lists the components included in the packaging for assembly.
Instructions for safely unpacking the machine and its parts.
Step-by-step guide for attaching the guide bar and chain.
Explains the function of the engine start/stop switch.
Describes the choke lever positions for starting.
Explains how to use the primer for cold starts.
Details the pressure relief valve for easier starting on specific models.
Explains how to regulate chain speed using the throttle.
Describes the function of the interlock lever.
Instructions for manual engine start-up.
Explains the chain brake system and its engagement/disengagement.
Essential pre-operation checks and ensuring fuel/oil tanks are filled.
Instructions for safely refuelling the machine.
Guidance on filling the chain oil tank.
How to check and adjust chain tension for safety and performance.
Instructions for setting the anti-freeze device for cold weather.
Procedures for performing general and operating safety checks.
Detailed steps to verify the chain brake is functioning correctly.
Instructions for starting the machine, including cold and warm starts.
Step-by-step guide for starting a cold engine.
Instructions for starting the engine when it is already warm.
General advice and procedures for operating the machine.
Ongoing checks during operation, like chain tension and oil delivery.
Techniques for different cutting tasks.
Recommendations for optimal machine use and running-in period.
Instructions for safely stopping the engine and the machine.
Importance of safety regulations and general maintenance overview.
Guidance on mixing petrol and oil for the two-stroke engine.
Specifies the type of unleaded petrol to use.
Specifies the type of synthetic oil for two-stroke engines.
Details on how to prepare and store the fuel mixture.
Safe procedures for refuelling the machine.
Instructions for filling the chain lubrication oil tank.
How to clean the machine and engine after use.
Instructions for cleaning the cutting chain.
Checking and cleaning lubrication holes on the machine and bar.
Instructions for cleaning the air filter to maintain engine performance.
Advice on checking and maintaining the clutch housing.
Checking the condition of the chain drive sprocket.
How to check, clean, and replace the spark plug.
Information on replacing the starter rope.
Importance of sharpening the cutting chain for safety and efficiency.
Detailed steps for sharpening the chainsaw chain yourself.
When and how to replace the cutting chain.
Maintenance procedures for the guide bar to ensure proper function.
What to do if the chain moves at idle speed.
Information on carburettor tuning for performance and emissions.
Guidance on understanding manual symbols, notes, and warnings.
Information on how figures, components, and titles are referenced.
Emphasizes operator training and familiarization with controls.
Details required personal protective equipment (PPE) and fuel handling.
Safe operation, work area considerations, lighting, and supervision.
Importance of regular maintenance and correct storage.
Guidelines for responsible machine use and disposal.
Describes the chainsaw's purpose and design.
Specifies authorized uses like felling and bucking trees.
Lists forbidden uses and their consequences.
Identifies the intended user as a consumer/non-professional.
Explains the meaning of various safety symbols on the machine.
Details the information found on the machine's identification label.
Identifies and describes the main parts of the chainsaw.
Lists the components included in the packaging for assembly.
Instructions for safely unpacking the machine and its parts.
Step-by-step guide for attaching the guide bar and chain.
Explains the function of the engine start/stop switch.
Describes the choke lever positions for starting.
Explains how to use the primer for cold starts.
Details the pressure relief valve for easier starting on specific models.
Explains how to regulate chain speed using the throttle.
Describes the function of the interlock lever.
Instructions for manual engine start-up.
Explains the chain brake system and its engagement/disengagement.
Essential pre-operation checks and ensuring fuel/oil tanks are filled.
Instructions for safely refuelling the machine.
Guidance on filling the chain oil tank.
How to check and adjust chain tension for safety and performance.
Instructions for setting the anti-freeze device for cold weather.
Procedures for performing general and operating safety checks.
Detailed steps to verify the chain brake is functioning correctly.
Instructions for starting the machine, including cold and warm starts.
Step-by-step guide for starting a cold engine.
Instructions for starting the engine when it is already warm.
General advice and procedures for operating the machine.
Ongoing checks during operation, like chain tension and oil delivery.
Techniques for different cutting tasks.
Recommendations for optimal machine use and running-in period.
Instructions for safely stopping the engine and the machine.
Importance of safety regulations and general maintenance overview.
Guidance on mixing petrol and oil for the two-stroke engine.
Specifies the type of unleaded petrol to use.
Specifies the type of synthetic oil for two-stroke engines.
Details on how to prepare and store the fuel mixture.
Safe procedures for refuelling the machine.
Instructions for filling the chain lubrication oil tank.
How to clean the machine and engine after use.
Instructions for cleaning the cutting chain.
Checking and cleaning lubrication holes on the machine and bar.
Instructions for cleaning the air filter to maintain engine performance.
Advice on checking and maintaining the clutch housing.
Checking the condition of the chain drive sprocket.
How to check, clean, and replace the spark plug.
Information on replacing the starter rope.
Importance of sharpening the cutting chain for safety and efficiency.
Detailed steps for sharpening the chainsaw chain yourself.
When and how to replace the cutting chain.
Maintenance procedures for the guide bar to ensure proper function.
What to do if the chain moves at idle speed.
Information on carburettor tuning for performance and emissions.
General| Power source | Petrol |
|---|---|
| Engine displacement | 38.5 cm³ |
| Power | 1.6 kW |
| Oil pump | Automatic |
| Weight (without bar and chain) | 4.9 kg |
| Bar length | 35 cm |
| Chain type | 3/8" |
