EN - 19
1.
2.
3.
4.
5. Regulate the speed and cutting height
6.
To proceed in reverse gear
with the cutting device engaged, it is necessary
to press and hold the consent button (par.
5.10) so as not to cause the engine to stop.
–
– When driving on grass free surfaces
–
6.5.5 Suggestions for maintaining
a nice lawn
•
•
• If the cutting device are positioned too
•
should be cut a little higher to prevent
•
the grass being ripped out of the ground.
•
•
to ensure a sharp cut of the grass and
cuttings through the discharge chute.
•
•
6.5.6 Emptying the grass catcher (for
NOTE The emptying of the grass catcher
can only be done with the cutting device
disengaged, otherwise the engine stops.
•
•
1. disengage the cutting device (par.
2.
3.
4.
•
5.
and tip the grass catcher bag
6. close the grass catcher again so
To Next Page
Loading...
