Need help?Do you have a question about the Stiga RANGER and is the answer not in the manual?
General| Cutting width | 45 cm |
|---|---|
| Drive | Self-propelled |
| Cutting height range | 27 - 80 mm |
| Self-propelled | Yes |
| Cutting method | Mulching, Side discharge |
| Engine Type | 4-stroke |
| Cutting Height Adjustment | Central |
Explains symbols on the machine for user attention during operation and maintenance.
Explains how figures and headings are numbered and referenced in the manual for clarity.
Details the rear-wheel drive, hydrostatic transmission, and front-mounted tool drive.
Describes the articulated steering for enhanced maneuverability around obstacles.
Explains the electrical safety system that interrupts dangerous operations.
Introduces the various controls for operating machine functions.
How to switch between working and transport positions using the pedal.
Explains the clutch-parking brake pedal and its three positions.
Details the inhibitor function for locking the clutch-brake pedal for secure parking.
Describes the pedal controlling drive speed and activating the service brake.
Information on adjusting the steering wheel and related safety precautions.
Explains the dual-function control for engine speed and cold starting.
Describes the dedicated throttle control for engine speed adjustment.
Details the pull-type choke control for starting cold engines.
Explains the ignition lock for starting, stopping, and headlight activation.
Describes the lever for engaging/disengaging the power take-off for accessories.
Explains the function of the hour meter for tracking working time.
Details the electrical control for variable cutting height adjustment.
Describes the lever for disengaging the transmission for manual movement.
Information on seat adjustment and the integrated safety switch.
How to open and close the engine casing for maintenance access.
Details the quick connections for easy shifting and replacement of implements.
Instructions on using and storing lead-free petrol safely.
How to check and maintain the engine oil level for proper operation.
How to check the transmission oil level for maintenance.
Details general and electrical safety checks to be performed before each use.
Step-by-step instructions for starting the engine on different models.
Advice on operating the machine, especially on slopes and during turns.
Instructions for safely stopping the engine and the machine.
Guidelines for cleaning the machine to prevent fire risks and maintain components.
Explains the STIGA Service programme and recommended servicing intervals.
Steps to take before performing any service or maintenance, including safety measures.
Specifications for adjusting front and rear tyre pressure for optimal performance.
Details on changing engine oil, including intervals, oil type, and quantity.
Table showing oil change intervals based on hours of operation or calendar months.
Information on SAE 10W-40 oil, its quantity, and the draining process.
Instructions for replacing the oil filter on Power model engines.
Instructions for replacing the oil filter on Excellent model engines.
Recommendations for replacing the fuel filter for different machine models.
Checks required for belt transmissions after initial operation to ensure integrity.
How to check and adjust steering chains for optimal clearance and performance.
Information on battery care, charging, and safety warnings.
How to charge the battery using the engine's generator for power.
Instructions for charging the battery with a suitable external battery charger.
Steps for removing and installing the battery, including correct cable connection order.
How to clean battery terminals if they are coated with oxide.
Instructions for cleaning and replacing the air filter on different models.
Specific instructions for Ranger, President, and Power air filter cleaning and replacement.
Specific instructions for Excellent model air filter cleaning and replacement.
Guidance on replacing the spark plug and its required specifications.
How to clean the engine's air intake system for optimal cooling.
Table detailing lubrication points, actions, and figures for essential maintenance.
Information on replacing fuses for common operational faults.
To Next Page