EN - 9
• TS-TX-TH models
4.9
CATCHER TIPPING LEVERS
part of the grass catcher bag supports
Connect the end of the lifting piston
4.10
4.11 SIDE DISCHARGE CHUTE
1.
positioned in their housings.
2.
it outside the side discharge chute.
3.
the side discharge chute, so that it
passes through the coils of the spring
4.
and rotate the pin in order to bend
so that it cannot slide out, causing
Check that the spring works
correctly and keep the side discharge
chute securely lowered. Make sure
that the pin is fitted properly to prevent
it from falling out accidentally.
For models with optional
side unloading: make sure that the side
unloading guard (Fig. 21.A) is lowered and
locked by the safety lever (Fig. 21.B).
Before disassembling or
servicing the deector, always push the safety
lever (Fig. 21.B) and lift the side unloading
guard (Fig. 21.A) to allow disassembly.
NOTE To remove the deector, perform
assembly steps in reverse order.
5. CONTROLS
5.1
5.2
1. Increasing
the pressure on the pedal
To Next Page
Loading...
