To Next PageTo Next PageWhat to do if Stiga TRE 0801 does not start and the spark plug is faulty?
If your Stiga Engine doesn't start or starts badly, the spark plug may be badly connected or faulty. In this case, check the spark or replace the spark plug.
What to do if Stiga TRE 0801 starts but does not run and the petrol tank is obstructed?
If your Stiga Engine starts but does not run, the petrol tank might be obstructed. Check the pump functioning, and then clean or replace the pump.
What to do if petrol pump pressure indicator tube is broken on Stiga TRE 0801?
If your Stiga Engine doesn't start or starts badly, the petrol pump pressure indicator tube may be broken or disconnected. Check or replace the tube.
What to do if there is a poor seal of carburettor needle valve on Stiga TRE 0801?
If your Stiga Engine doesn't start or starts badly, there may be a poor seal of the carburettor needle valve. Clean the carburettor housing and needle valve, or replace the carburettor.
How to fix insufficient pressure in Stiga Engine?
If your Stiga Engine doesn't start or starts badly, there might be insufficient pressure. Check the tightness of the cylinder head screws and replace the washer if necessary. Also, check for wear and tear on the piston rings.
Details the meaning of safety symbols placed on the engine for user awareness.
Emphasizes reading manuals and learning safe engine operation and shutdown procedures.
Outlines safety measures for clothing, hair, and refueling before engine use.
Covers safe operating practices, including ventilation, avoiding hot parts, and stopping procedures.
Provides safety guidelines for performing maintenance and storing the engine properly.
Critical safety advice before performing any maintenance or repair tasks.
Lists common causes and solutions for engine starting difficulties.
Troubleshooting tips for issues causing irregular engine operation.
Identifies reasons for reduced engine power and how to resolve them.
General
