To Next PageTo Next PageWhat to do if Stiga Engine does not start and the spark plug is faulty?
If your Stiga Engine doesn't start or starts badly, the spark plug may be badly connected or faulty. In this case, check the spark or replace the spark plug.
What to do if Stiga TRE 0701 starts but does not run and the petrol tank is obstructed?
If your Stiga Engine starts but does not run, the petrol tank might be obstructed. Check the pump functioning, and then clean or replace the pump.
What to do if petrol pump pressure indicator tube is broken on Stiga TRE 0701 Engine?
If your Stiga Engine doesn't start or starts badly, the petrol pump pressure indicator tube may be broken or disconnected. Check or replace the tube.
What to do if there is a poor seal of carburettor needle valve on Stiga Engine?
If your Stiga Engine doesn't start or starts badly, there may be a poor seal of the carburettor needle valve. Clean the carburettor housing and needle valve, or replace the carburettor.
How to fix insufficient pressure in Stiga TRE 0701 Engine?
If your Stiga Engine doesn't start or starts badly, there might be insufficient pressure. Check the tightness of the cylinder head screws and replace the washer if necessary. Also, check for wear and tear on the piston rings.
Explains how important information and warnings are highlighted in the manual for user guidance.
Details the purpose and placement of safety symbols on the engine for user safety.
Emphasizes reading instructions, user familiarity, and operator responsibility for safety.
Covers essential pre-operation checks like clothing, cooling, and fuel handling precautions.
Outlines safe operating practices, including environment, starting, handling hot parts, and transport.
Details safe practices for routine maintenance, cleaning, and storing the engine.
Discusses toxic substances produced during combustion and emission reduction systems.
Identifies and lists the main parts of the engine, including a space to record the serial number.
Explains the throttle trigger and its common operating positions (CHOKE, FAST, SLOW).
Details how temperature and altitude affect engine performance and operation.
Specifies requirements for fuel quality, type, and additives for engine reliability and warranty.
Guides on selecting the correct oil type and viscosity grade based on operating temperature.
Explains the importance and function of the air filter for engine efficiency and longevity.
Provides guidance on selecting the correct spark plug type, thread length, and electrode gap.
Lists essential pre-operation checks for oil level, air cleaner, refuelling, and spark plug connection.
Step-by-step guide to checking the engine oil level using the dipstick.
Instructions for inspecting the air filter element for proper condition and cleanliness.
Important precautions and instructions for refueling the engine safely, especially when cold.
Guidance on correctly connecting the spark plug cap for proper ignition.
Details the procedure for starting the engine when it is cold.
Outlines the procedure for starting the engine when it is already warm.
Advises on optimizing engine performance by using maximum revs and includes safety warnings.
Describes the correct procedure for stopping the engine during operation.
Details the steps for safely stopping the engine after use, including post-stop checks.
Provides instructions on how to clean the engine exterior and prepare it for storage.
Offers specific precautions for storing the engine for extended periods to ensure future usability.
Lists critical safety precautions to be observed before and during maintenance operations.
Presents a schedule for routine maintenance based on operating hours or calendar periods.
Provides detailed instructions on how to safely drain and refill the engine oil.
Details the procedure for cleaning the engine's silencer and cooling air intakes.
Explains how to clean and maintain the air filter element for optimal engine performance.
Guides on how to check, clean, and gap the spark plug for proper ignition.
Lists common causes and solutions for difficulty starting the engine.
Identifies potential issues causing irregular engine operation and their remedies.
Addresses causes and solutions for a decrease in engine power during use.
Lists specific materials required for operation, including fuel and oil specifications.
General
