Continuation of
Important Safety Precautions
14.
Keep the handles
dry,
clean and free of
oil
or fuel mixture.
15.
Operate the chain saw only
in
well venti-
lated areas.
16.
Do
not operate a chain saw in a tree
unless specifically trained
to
do
so.
17.
All chain saw service, other than the
items listed
in
the Owner's Manual main-
tenance instructions, should
be
per-
formed by competent chain saw service
personnel.
(E.
g.,
if improper tools are
used to remove the flywheel, or if
an
improper tool is used to hold the fly-
wheel
in
order
to
remove the clutch,
structural damage to the flywheel could
occur which could subsequently cause
the flywheel to burst).
18.
Avoid kickback. Kickback is the upward
motion of the guide bar which occurs
when the saw chain
at
the nose of the
guide bar contacts
an
object. Kickback
can
lead to dangerous loss of control of
the chain
saw.
To
avoid kickback:
- Hold the chain saw firmly with both
hands.
- Don't over reach.
- Don't let the nose of the guide bar
contact a log, branch, ground or any
other obstruction.
- Cut
at
high engine speeds.
- Don't cut above shoulder height.
- Follow manufacturer's sharpening
and
maintenance instructions for the
saw chain.
- Use devices such
as
low kickback
chain, which may help to reduce the
hazards associated with kickback.
19.
When transporting your chain
saw,
use
the appropriate guide bar scabbard.
To Next Page
Loading...
Need help?
General
