Stihl AR 1000 - 14 USB Port (AR 1000 Only); Charging a USB Device; 15 Transporting; Transporting the Backpack Battery

0458-794-8621-C
17
English 14 USB Port (AR 1000 only)
14.1 Charging a USB Device
WARNING
High voltage and excessive charging current at the USB port
may damage the connected USB device. Only charge USB
devices with an input voltage of 5 V and a maximum
charging current of 1.5 A.
To charge a USB device with the battery:
► Unplug the battery from the power tool or charger.
► Remove the cover (1).
► Pass the plug (2) of the USB device to be charged through
the opening in the back plate.
► Insert the USB plug in the backpack battery's USB
port (3).
► Replace the cover.
► Press the button on the battery.
► Before charging the backpack battery or starting work with
a power tool, first remove any USB device connected to
the USB charging port.
15.1 Transporting the Backpack Battery
WARNING
To reduce the risk of a short circuit, which could lead to
electric shock, fire and explosion, never transport the battery
in a metal container or near metal objects (e.g., paper clips,
nails, coins, keys), @ 5.1.
When transporting an undamaged and properly functioning
backpack battery:
► Disconnect the battery from the power tool and insert the
AP Adapter in the pouch.
► Carry the battery on your back or by the handle.
► Never transport the backpack battery in a metal or other
container that is capable of conducting electricity, or near
metal objects (e.g., paper clips, nails, coins, keys).
► If you are placing the battery in a container or transporting
it in a vehicle, secure it and its container against turnover,
impact and damage.
► Never sit on or stand on the battery. Never place objects
on the battery or stack batteries on top of one another.
14 USB Port (AR 1000 only)
4
1
0000-GXX-2541-A0
3
2
15 Transporting
0000-GXX-2921-A0