ASA 85
English
19
Maintenance Operations
Maintenance and Care
The following maintenance intervals apply to normal usage and operating conditions. If your
daily working time is longer than normal or cutting conditions are difficult (very dusty work
area, resin-rich wood, etc.), shorten the specified intervals accordingly. If you only use your
power tool occasionally, extend the intervals accordingly.
Disconnect the connecting cord from the power tool before performing any work.
before starting work
during cutting, after first half
hour
after finishing work or daily
weekly
monthly
every 12 months
after 400,000 cuts
if problem
if damaged
as required
Complete unit
Visual inspection (condition) XXX
Check operation XX
Clean XX
Service
1)
XX X
Cutting attachment
Clean XX
Lubricate with grease XX
Cutting blade (after first use or replacement) Sharpen XX
Cutting blade
Sharpen XX
Replace X
Anvil blade Replace X
Play between cutting and anvil blades
Check XX
Adjust X
Contact point between cutting and anvil blades Adjust X
Safety labels Replace X
1)
STIHL recommends an authorized STIHL servicing dealer.
To Next Page
Loading...
