0458-724-8601-A
19
English
14 Inserting and Removing the Battery
To determine the battery's state of charge:
► Press the button (1) on the backpack battery.
A single short beep will be emitted. The LEDs on the battery
will glow or flash green for about 5 seconds and indicate the
state of charge (see illustration).
For example:
If six green LEDs glow continuously: full charge.
If one green LED is flashing and four long beeps are emitted:
less than 20 % charge.
14.1 Inserting the Battery
WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 7. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 7.
WARNING
To reduce the risk of unintended activation, never store the
battery in the blower, @ 6.1.
To insert the battery:
► Position the battery (1) on the backplate (2) so that the
guides on the backplate engage the recesses in the
battery.
► Open the lever (5) and hold it there.
► Press the battery (1) against the backplate (2) until the
plug (3) connects to the socket (4).
14 Inserting and Removing the Battery
0000-GXX-2673-A0
100 % 0 %
2
1
0000099095_001
3
2
5
1
4
0000099096_001
To Next Page
Loading...
