To Next PageTo Next PageWhy does my Stihl Blower keep cutting out?
If your Stihl Blower cuts out during operation, it could be due to the blower overheating. Remove the battery and allow the blower to cool down. Alternatively, there may be an electrical malfunction. In this case, remove the battery and insert it again, then switch on the blower.
Why does my Stihl BGA 56 Blower cut out during operation?
If your Stihl Blower cuts out while you're using it, it might be because the battery is either too hot or too cold. Remove the battery and allow both the blower and battery to cool down gradually at ambient temperatures of about 50 °F to 68 °F (10 °C to 20 °C).
What to do if my Stihl BGA 56 does not start?
If your Stihl Blower does not start when switched on, several factors could be at play. First, the battery might have low charge, so try charging it. Alternatively, the battery could be too hot or too cold; in this case, remove it and allow it to cool down or warm up. There might be no electrical contact between the blower and battery, so remove the battery and clean the contacts in the battery compartment before refitting it. The blower itself may be too hot, so remove the battery and let the blower cool down. Also, check if the blower or battery is damp and allow it to dry. If 3 LEDs continue to flash red or 4 LEDs continue to flash red after refitting the battery, it indicates a malfunction, and you should contact your STIHL servicing dealer.
How to increase the runtime of my Stihl BGA 56 Blower?
If the Stihl Blower's runtime is too short, the battery may not be fully charged, so fully charge the battery. Alternatively, the normal battery life may have been exceeded, so replace the battery.
Why is the runtime of my Stihl BGA 56 Blower too short?
The runtime of your Stihl Blower might be too short due to: * **Incomplete Charging:** The battery may not be fully charged; ensure it is completely charged before use. * **End of Battery Life:** The battery's useful life might be over. In this case, have the battery checked by an authorized STIHL servicing dealer.
What to do if Stihl Blower battery is not being charged?
If the battery is not being charged when inserted in the charger of your Stihl Blower, it could be due to a lack of electrical contact between the charger and battery. To solve this, remove the battery, clean the contacts on the charger, and then refit the battery. If the issue persists, there may be a malfunction in the charger, in which case you should not use the charger and contact your STIHL servicing dealer.
What to do if charge process of Stihl Blower does not start?
If the charge process doesn't start when you insert the battery into the charger for your Stihl Blower, it might be because the battery is either too hot or too cold. Simply leave the battery in the charger, and the charging process will begin automatically once the battery reaches the appropriate temperature range.
What to do if LED on Stihl Blower charger flashes red?
If the LED on your Stihl Blower charger is flashing red, it could indicate a few issues: * **Poor electrical contact:** Remove the battery and reinsert it into the charger. * **Battery malfunction:** Remove the battery and reinsert it into the charger. If the LED continues to flash, do not attempt to charge the battery. If 4 LEDs on the battery are flashing, the battery has a malfunction and must be replaced. Otherwise, have the battery checked by an authorized STIHL servicing dealer. * **Charger malfunction:** Have the charger checked by an authorized STIHL servicing dealer.
What to do if Stihl Blower battery is not being charged even though LED on charger glows green?
If your Stihl Blower battery isn't charging even when the LED on the charger is green, the battery might be too hot or too cold. Allow the battery to warm up or cool down gradually at ambient temperatures of about 50 °F to 68 °F (10 °C to 20 °C). Also, make sure you're operating the charger in a dry, enclosed room with ambient temperatures between 41 °F to 104 °F (5 °C to 40 °C).
What to do if the battery jams when inserting it into my Stihl Blower?
If the battery jams when being inserted into the battery compartment of your Stihl Blower, it's likely that the guides or contacts in the battery compartment are dirty. Clean these guides or contacts to ensure smooth battery insertion.
Covers manual intro, intended use, operator qualifications, and general safety.
Details essential PPE like eye protection, clothing, and footwear for safe operation.
Specific safety advice for the blower unit, including electrical hazards.
Guidelines for safe operation, including pre-operation checks, handling, conditions, and procedures.
Critical safety warnings regarding battery handling, charging, and storage.
Safety guidelines for using the battery charger to prevent fire, shock, and damage.
Safety warnings for maintenance, repair, and storage procedures.
General safety rules for battery-powered tools, including unintentional starting and battery handling.
Instructions on how to connect and prepare the charger for battery charging.
Process for charging the battery, including initial full charge recommendation.
Instructions on how to properly insert the battery into the blower.
Common problems with the blower and battery and their solutions.
Troubleshooting common issues with the battery charger.
General
