BR 500, BR 550, BR 600
English
17
N Turn the cap counterclockwise
(approx. 1/4 turn).
N Remove fuel filler cap.
Refueling
Take care not to spill fuel while fueling,
and do not overfill the tank.
Closing the toolless filler cap
With grip in an upright position:
N Insert the cap – the raised
positioning marks on the cap and
the fuel tank opening must line up.
N The cap should drop fully into the
opening in this position. Make sure
tank is not overfilled.
N While pressing the cap down firmly,
twist it clockwise as far as it will go
(approx. 1/4 turn).
N Fold down the grip.
Checking for proper closure
N The lug on the grip must engage
entirely in the recess (arrow), and
the grip must lie completely flush
with the top of the cap.
N Grip the cap and check for
tightness.
N If the cap can be moved, it is not
properly installed.
N If the cap does not tighten properly,
the cap parts may be misaligned
with each other, or the cap may be
damaged or broken. See the
"Fueling Instructions" section of the
Safety Precautions for how to
correct a misaligned cap and
additional information. Never use
your machine with a misaligned,
damaged or broken cap.
To Next Page
Loading...
