Stihl BR 550 - Mounting the Blower Tubes; Discharge Wire Installation

12
English
BR 500, BR 550, BR 600
Mounting the Blower Tubes
: Pass the discharge wire (1) through
the blower tube (2).
: Push the blower tube (3) onto
blower tube (2) and engage it on the
lug (4).
: Pass the discharge wire (1) through
the slide ring (5).
: Push the slide ring (5) (wide lip
facing left) onto the blower tube
shoulder (2).
: Pass the discharge wire (1) through
the hose clamp (7) (without retainer
for throttle cable) – screw recess
facing you.
: Pass the discharge wire (1) through
the pleated hose (7).
: Push the blower tube (2) into the
pleated hose (7).
: Secure the hose clamp (6) with
screw (8).
: Pass the discharge wire (1) through
the pleated hose (7) and hose
clamp (9) (with retainer for throttle
cable) – screw recess and retainer
facing you.
452BA015 SC
452BA016 SC
452BA017 SC