Stihl BR 550 - Transport Aid Fitting; Assembling Length-Adjustable Blower Attachment; Note: No Discharge Wire Needed for Adjustable Attachment

15BR 500, BR 550, BR 600
English
Fitting the Transport Aid
When storing or transporting the
machine:
: Secure the velcro strip to the blower
tube – pull the flap through the
buckle.
: Attach blower tube to handle
opening in the backplate.
A = Length-adjustable blowing
attachment*
B = Non-adjustable blowing
attachment*
Machines with a length-adjustable
blowing attachment have no
discharge wire. Any buildup of static
electricity is dissipated via the
conductive control handle.
* See “Guide to Using the Manual”
Mounting the Blower Tubes
BR 500
: Push blower tube (1) onto blower
tube (2) and engage it in one of the
slots (3).
BR 550/600
: Push blower tube (1) onto blower
tube (2) and engage it in one of the
slots (3).
Assembling the Blower –
with length-adjustable
blowing attachment*
452BA073 KN
A
B
452BA074 KN
1
2
3
452BA075 KN
1
2
3