Stihl BR 550 - Control Handle Mounting and Adjustment; Disassembling Blower Tubes and Control Handle; Protect Discharge Wire During Disassembly

14
English
BR 500, BR 550, BR 600
Mounting and Adjusting the
Control Handle
: Push the control handle (1) onto the
blower tube (2).
: Put the unit on your back.
: Move the control handle (1) along
the tube to the most comfortable
position.
: Tighten down the screw (3) firmly.
: Clip throttle cable (4) with sleeve (5)
to retainer (6).
Disassembling the Blower Tubes
and Control Handle
: Reverse the assembly procedure.
Take care not to damage the
discharge wire during disassembly.
: Rotate the nozzle and blower tubes
to disengage them from the lugs
and then remove them.