28
English
BR 500, BR 550, BR 600
If the engine is down on power, check
the spark arresting screen in the muffler.
: Wait for the muffler to cool down.
: Take out the screws (3).
: Remove the scoop (4).
* see "Guide to Using this Manual"
: Remove the spark arresting
screen (5).
: Clean the spark arresting screen.
If screen is damaged or heavily
carbonized, fit a new one.
: Refit the spark arresting screen.
: Fit the scoop.
Replacing the starter rope
: Take out the screws (1).
: Remove the starter cover (2).
: Use a screwdriver or suitable pliers
to ease the spring clip (3) off the
starter post.
The rewind spring may pop out and
uncoil – take care to avoid injury.
: Carefully remove the rope rotor with
washer (4) and pawls (5).
Spark Arresting Screen*
in Muffler
Replacing Starter Rope
and Rewind Spring
To Next Page
Loading...
