EasyManuals Logo

Stihl EVC 200 C User Manual

Stihl EVC 200 C
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Place the STIHL machine on a level surface.
Stop the engine.
Unscrew oil dipstick (1).
Add engine oil using a suitable funnel until it
reaches the maximum filling level (2).
The oil capacity is 0.5 litres.
Screw in oil dipstick (1).
Check the engine oil level before each starting
procedure. 7.2. If necessary, top up the
engine oil.
The engine is designed for commercially availa‐
ble 4-stroke engine oils.
Use category SF, SG, SH, SJ engine oils and
higher.
STIHL recommends the use of the following
engine oils:
SAE 30
SAE 10W-30
Match the oil grade to the ambient tempera‐
ture where the STIHL machine will be used:
Operation at temperatures above 4°C: SAE 30
Operation at temperatures below 4°C:
SAE 10W-30
6 Cleaning
6.1 Cleaning the Engine
Stop the engine.
Allow the engine to cool down.
Clean the engine with a damp cloth.
Clean the ventilation slots with a paintbrush.
7 Maintenance
7.1 Maintenance Intervals
Maintenance intervals are dependent on the
ambient conditions and the working conditions.
STIHL recommends the following maintenance
intervals:
Before each use:
Check the oil level, 7.2.
Check the air filter, 7.3.
After the first month or after 5 operating hours:
Change the engine oil, 7.6.
Every 3 months or after 25 operating hours:
Clean the air filter, 7.4.
Every 6 months or after 50 operating hours:
Change the engine oil, 7.6.
Check the spark plugs, 7.5.
Every 12 months or after 100 operating hours:
Have an inspection carried out by a specialist
dealer. STIHL recommends STIHL specialist
dealers.
7.2 Checking the Oil Level
Place the STIHL machine on a level surface.
Stop the engine.
Unscrew oil dipstick (1) and wipe with a cloth.
Insert oil dipstick (1) in the filler neck, do not
screw in.
Remove the oil dipstick and read off the oil fill‐
ing level on measuring scale (2). If necessary,
top up the engine oil using a suitable funnel
until it reaches the maximum filling level (3).
Screw in oil dipstick (1).
7.3 Replacing the Air Filter
Stop the engine.
Place the STIHL machine on a level surface.
Clean the cover and housing of the air filter
with a cloth.
6 Cleaning English
0478-983-9945-A 11

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl EVC 200 C and is the answer not in the manual?

Stihl EVC 200 C Specifications

General IconGeneral
BrandStihl
ModelEVC 200 C
CategoryTractor Accessories
LanguageEnglish

Related product manuals