Stihl FS 110 - Cutting Attachments; Deflectors and Stops; Handles; Harnesses

FS 110, FS 110 R
English
19
Permissible combinations
The complete equipment comprises:
– Cutting attachment
– Deflector
– Handle
– Harness
Choose the proper combination from the
table depending on the cutting
attachment. Read the table horizontally
from left to right.
Cutting attachments
Mowing heads
1 STIHL SuperCut 20-2
2 STIHL AutoCut C 25-2
3 STIHL AutoCut 25-2
4 STIHL TrimCut 31-2
5 STIHL FixCut 25-2
6 STIHL PolyCut 20-3
Metal cutting attachments
7 Grass cutting blade 230-4
8 Grass cutting blade 230-8
9 Brush knife 250-3
10 Circular saw blade 200 scratcher
tooth
11 Circular saw blade 200 chisel tooth
Circular saw blades of other, non-metal
materials must not be used.
Deflectors, stop
12 Deflector only for mowing heads
13 Deflector with
14 Skirt and blade for all mowing heads
(see “Mounting the deflector”)
15 Deflector without skirt and blade for
all metal mowing tools and brush
knives
16 Limit stop for circular saw blades
Handles
17 Loop handle
18 Loop handle with
19 Barrier bar
20 Bike handle
Harnesses
21 Shoulder strap can be used
22 Shoulder strap must be used
23 Full harness can be used
24 Full harness must be used
Warning!
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of con-
trol and contact with the cutting
attachment.
Use grass cutting metal blades and
brush knifes on this unit only if equipped
with a bike handle or a loop handle with
barrier bar.
Use circular saw blades on this unit only
if equipped with a bike handle.
Do not use rigid plastic blades on this
unit.