Stihl FS 110 - Mounting the Bike Handle; Mounting the Loop Handle

FS 110, FS 110 R
English
20
The following STIHL interchangeable
attachments may be mounted on the
basic machine:
Attaching the bicycle handle with
rotating handlebar support
The machine is delivered with the
rotating handlebar support already
attached to the shaft. The clamps must
be removed in order to attach the
handlebar.
Removing the clamps
N hold onto the lower (1) and upper
clamps (2)
N Unscrew the tommy screw (3) –
after the tommy screw has been
unscrewed, the parts are loose and
are pressed apart by the two
springs (4, 5)!
Approved Power Tool
Attachments
228BA047 KN
BF
FH
FCS
KB
KW
HT
Interchangeable
attachment
1)
stop (barrier bar) on loop handle is
required
2)
not approved for machines with
bicycle handle
3)
harness need not be used
Use
BF
1)
Soil cultivator
FCS
2) 3)
Edger
FH
1)
Scrub cutter
HL 0°
2)
Hedge trimmer
HL 135°
1) 2)
Hedge trimmer
HT
2)
Pole pruner
KB (4601)
2)
Bristle brush
KW (4601)
2)
Sweeper drum
assembly
Mounting the Bike Handle