Stihl FS 110 - Throttle Cable and Carrying Ring; Deflector Installation

FS 110, FS 110 R
English
22
N Press throttle cable (14) into the
throttle cable support (15)
Adjusting the throttle cable
N Check throttle cable adjustment –
see "Adjusting the throttle cable"
Swiveling the handlebar
Into the transport position
N Loosen the tommy screw (3) and
unscrew it until it is possible to
swivel the handlebar (7) clockwise
N Turn the handle bar 90° and then
swivel it downward
N Tighten tommy screw (3)
Into the working position
N Swivel and turn the handlebar
counterclockwise in the opposite of
the order described above
Mounting the Loop Handle with Barrier
Bar
N Fit the square nuts (1) in the barrier
bar (2); the holes must line up.
15
14
15
14
15
250BA002 KN
Mounting the Loop Handle
2
002BA098 KN
1
1