FS 110, FS 110 R
English
33
Floating positions
Mowing tools (A) such as mowing 
heads, grass cutting blades and brush 
knives
N should just touch the ground.
Circular saw blades (B)
N should "hover" about 8 in. (20 cm) 
above the ground.
When the correct floating position has 
been reached:
N Tighten down the screw on the 
carrying ring firmly.
Detaching the unit from the harness
N Press down the bar on the 
carabiner (1) and pull the carrying 
ring (2) out of the carabiner.
Controls
Control handle on handlebar
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Starting / Stopping the 
Engine
3
STOP
56
4
7
002BA182 KN
1
2
START
STOP-