HL 100, HL 100 K
English
29
For periods of 3 months or longer
N Drain and clean the fuel tank in a
well ventilated area.
N Dispose of fuel properly in
accordance with local
environmental requirements.
N Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
N Clean the cutting blades, check
condition and spray with STIHL
resin solvent.
N Fit the blade scabbard.
N Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
N Store the machine in a dry, high or
locked location. Out of the reach of
children and other unauthorized
persons.
Storing the Machine
To Next Page
Loading...
