To Next PageTo Next Page
Need help?Do you have a question about the Stihl HS 56 and is the answer not in the manual?
Explains symbols attached or embossed on the machine.
Explains how instructions are supported by illustrations and marked.
Discusses ongoing product improvements and potential differences.
Details requirements for the person operating the hedge trimmer.
Details required protective apparel for safe operation.
Information regarding the power tool itself and modifications.
Guidelines for safely carrying and transporting the hedge trimmer.
Information on the required fuel mixture for the engine.
Procedures and safety precautions for refueling the machine.
Instructions for operating and troubleshooting the toolless fuel cap.
Checks and procedures before starting the engine.
Steps and safety precautions for starting the engine.
Importance of correct idle adjustment for safe operation.
Guidelines for holding and controlling the power tool during use.
Instructions for operating the hedge trimmer with the left hand.
Guidelines for operating the hedge trimmer in various environmental conditions.
Instructions for operating the hedge trimmer, including emergency shutdown.
Procedures for cleaning and storing the machine after use.
Details horizontal and vertical cutting methods for hedges.
Advises on observing local rules and avoiding cutting during rest periods.
Recommends the order for cutting thick branches and hedge sides/top.
Instructions on proper disposal of cuttings and the product.
Information on fuel mixture ratios and storage recommendations.
Procedures for opening the fuel tank cap.
Instructions and safety for refueling the machine.
Procedures for closing the fuel tank cap after refueling.
Explains the positions and functions of the Master Control lever.
How to set the Master Control lever for different starting conditions.
Detailed steps for starting cold and warm engines, including cranking and post-start procedures.
Procedure for safely switching off the engine.
Guidelines for the initial break-in period of a new machine.
Recommendations for operating the engine after extended use to prevent heat overload.
Instructions for cooling down and storing the machine after finishing work.
Information about the factory standard carburetor setting.
Steps for setting the carburetor to its standard configuration.
Procedures for adjusting the idle speed for optimal operation.
Adjustments for optimal engine performance at high altitudes.
Steps for safely removing the spark plug.
How to clean, check electrode gap, and use correct spark plugs.
Procedures for installing the spark plug correctly.
Details the Federal Emission Control Warranty for non-California regions.
Explains owner's rights and responsibilities under the warranty.
Outlines the warranty coverage period and terms.
Lists the owner's responsibilities for maintaining warranty coverage.
Details STIHL's warranty coverage for equipment engines.
Defines the start date and duration of the warranty.
Specifies warranty coverage for defective parts.
Outlines procedures for warranty repairs and service.
Lists parts covered under the emission control warranty.
Instructs on how to make a warranty claim.
Lists conditions that may exclude warranty coverage.
Specifies warranty details applicable only to California.
Explains owner's rights and responsibilities under the warranty.
Details manufacturer's warranty responsibilities for California.
Lists owner's responsibilities for California warranty coverage.
General
