EasyManua.ls Logo

Stihl HS 87 - User Manual

Stihl HS 87
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
STIHL HS 87
WARNING
Read Instruction Manual thoroughly
before use and follow all safety
precautions – improper use can
cause serious or fatal injury.
ADVERTENCIA
Antes de usar la máquina lea y siga
todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto
puede causar lesiones graves o
mortales.
Instruction Manual
Manual de instrucciones
Question and Answer IconNeed help?

Do you have a question about the Stihl HS 87 and is the answer not in the manual?

Stihl HS 87 Specifications

General IconGeneral
BrandStihl
ModelHS 87
CategoryTrimmer
LanguageEnglish

Summary

Guide to Using this Manual

Pictograms

Explains symbols used on the machine.

Textual Convention Explanations

Explains text conventions and illustration referencing.

Safety Precautions and Working Techniques

General Operational Safety

Essential safety rules for safe operation of the hedge trimmer.

Operator Requirements

Operators Physical Condition

Details operator's physical and mental health requirements.

Operator Clothing and Gear

Required Protective Apparel

Details required clothing and gear for safe operation.

The Hedge Trimmer Unit

Tool Condition and Modifications

Warns against modifications and checking tool integrity.

Using the Hedge Trimmer

Safe Transport of the Unit

Instructions for safe transportation of the hedge trimmer.

Fuel Information

Safe Fueling Procedures

Procedures and precautions for safe fueling.

Pre-Operation Checks

Fuel Cap Installation Guide

Guide to properly fitting the fuel cap for safety.

Pre-Start Inspection Checklist

Essential pre-operation inspections for the hedge trimmer.

Operation Guidelines

Grip and Control Techniques

Describes proper grip and stance during operation.

Key Unit Adjustments

Engine Idle Speed Adjustment

Guidance on setting correct idle speed for the engine.

Operating Environment

Environmental and Terrain Considerations

Discusses ventilation, visibility, and terrain for safe operation.

Operational Procedures

Emergency Stop and Blade Action

Procedures for stopping and understanding flywheel effect.

Maintenance, Repair, and Storage

Cutting Blade Care

Covers cleaning, checking, and sharpening cutting blades.

Muffler System Maintenance

Information on muffler function and maintenance.

Unit Usage

Hedge Cutting Sequence

Recommended order for cutting hedges.

Seasonal Hedging Regulations

Notes on municipal rules for hedging.

Cutting Techniques

Vertical Trimming Method

Describes the technique for vertical trimming.

Horizontal Trimming Method

Describes the technique for horizontal trimming.

Fuel Specifications

Gasoline Type and Octane

Specifies gasoline type and octane rating.

Fueling the Unit

Pre-Fueling Steps

Steps before adding fuel to the machine.

Fuel Cap Opening Procedure

Procedure for safely opening the fuel cap.

Refueling and Cap Closing

Instructions for adding fuel and closing the cap.

Engine Starting and Stopping

Cold Engine Start Procedure

Procedure for starting a cold engine.

Warm Engine Start Procedure

Procedure for starting a warm engine.

Air Filter Maintenance

Air Filter Element Types

Differentiates felt and paper filter elements.

Air Filter Cleaning and Replacement

Steps for cleaning or replacing filters.

Engine Emission Control

Exhaust Emission System

Explanation of how emissions are managed.

Carburetor Adjustment

Carburetor Tuning and Prep

General information and preparation steps.

Idle Speed Adjustment

Fixing Engine Stalling at Idle

How to fix engine stopping at idle.

Correcting Idle Blade Movement

How to correct blades running when engine is idling.

Muffler Spark Arresting Screen

Spark Arresting Screen Check

Checking and cleaning the screen.

Spark Plug Service

Spark Plug Inspection

How to inspect the spark plug.

Spark Plug Removal and Installation

Procedures for spark plug service.

Gearbox Lubrication

Gearbox Lubrication Steps

Steps for lubricating the gearbox.

Machine Storage

Long-Term Storage Instructions

Instructions for storing for 3 months or longer.

Blade Sharpening

Cutting Blade Sharpening Guide

How to properly sharpen cutting blades.

Regular Maintenance and Care

Maintenance Task Schedule

Comprehensive table of maintenance tasks.

Key Unit Components

Parts Identification Diagram

Diagram and list of main parts.

Technical Definitions

Component Definitions

Explanations of key components.

Product Specifications

Engine and Emission Specs

Technical details and emission compliance periods.

Maintenance and Repair Guidance

User Repair Recommendations

Recommendations for user repairs.

Product Disposal

Environmentally Friendly Disposal

Guidelines for environmentally friendly disposal.

Limited Warranty Policy

Warranty for Non-Emission Parts

Policy for parts not related to emissions.

Federal Emission Control Warranty

Warranty Coverage Details

Details on emission-related warranty coverage.

Owners Warranty Duties

User's duties for maintaining warranty.

Brand Trademarks

Registered STIHL Trademarks

List of officially registered STIHL trademarks.

Related product manuals