Do you have a question about the Stihl HS 46 and is the answer not in the manual?
Explains the meaning of symbols and icons used in the manual and on the machine.
Describes the various symbols and signal words used to convey important information.
Notes that product improvements may not be reflected in the manual.
Requirements for the operator's physical and mental state before and during operation.
Recommendations for appropriate attire to ensure operator safety and protection.
Details regarding the hedge trimmer itself, including modifications and condition checks.
Guidelines for safely carrying and transporting the hedge trimmer.
Information on the correct type of fuel and oil mixture required for the engine.
Step-by-step guide on how to safely refuel the hedge trimmer.
Troubleshooting steps for issues with the fuel filler cap.
Crucial adjustments for safe and proper operation, such as idle speed.
Guidelines for operating the hedge trimmer safely and effectively.
Techniques for maintaining a secure grip and control of the hedge trimmer.
Specific instructions for operating the hedge trimmer using the right hand.
Recommendations for the environment and conditions under which to operate the hedge trimmer.
General instructions and precautions for using the hedge trimmer.
Information on when it is appropriate to cut hedges.
Recommended order for cutting hedges and branches.
Proper methods for disposing of cuttings and the machine.
Guidance on the shelf life and storage of fuel mixtures.
Actions to take before starting the fueling process.
How to open the fuel filler cap correctly.
The process of filling the fuel tank.
How to properly close the fuel filler cap after refueling.
Explanation of the Master Control lever's different settings and their effects.
Instructions on how to adjust the Master Control lever for starting.
Covers procedures for starting a cold engine, warm engine, and cranking.
Procedure for safely shutting down the engine.
Specific operating recommendations for the initial usage phase.
Best practices for running the machine during use.
Actions to perform after the operating session is complete.
Basic details about the carburetor's factory settings.
The default carburetor settings for general operation.
How to set the engine's idle speed for proper operation.
Steps to safely remove the spark plug for inspection or replacement.
Instructions for correctly installing a spark plug.
Emission standards and compliance information.
California Air Resources Board emission standards.
Basic information about the engine type.
Indicates that this warranty statement does not apply to California models.
Outlines the rights and responsibilities of the owner regarding the warranty.
Specifies what is covered by the manufacturer's warranty.
Details the owner's duties to maintain warranty validity.
Clarifies that this section pertains exclusively to California.
Owner's rights and responsibilities for California warranty.
Manufacturer's obligations for California warranty.
Owner's duties for California warranty.
List of trademarks officially registered by STIHL.