Stihl HLA 65 User Manual

HLA 65
English
18
During Operation
The green light emitting diodes glow
continuously or flash to indicate the state
of charge.
If the light emitting diodes on the battery
flash or glow red – see "If the red light
emitting diodes glow continuously /
flash".
If the red light emitting diodes glow
continuously / flash
3901BA016 KN
80 - 100 %
60 - 80 %
40 - 60 %
20 - 40 %
0 - 20 %
1 light emitting
diode glows con-
tinuously red:
Battery is too hot
1)
2)
/cold
1)
1)
During charging process: Charging
process starts automatically after
the battery has cooled down /
warmed up.
4 light emitting
diodes flash red:
Fault in battery
3)
3 light emitting
diodes glow con-
tinuously red:
Power tool is too
hot – allow it to cool
down.
3 light emitting
diodes flash red:
Fault in power tool
4)
3901BA017 KN
2)
During operation: Power tool cuts
out – allow battery to cool down; it
may be necessary to take the
battery out of the power tool for this
purpose.
3)
Electromagnetic interference or
fault. Take the battery out of the
power tool and refit it. Switch on the
power tool – if the light emitting
diodes still flash, the battery is
faulty and must be replaced.
4)
Electromagnetic interference or
fault. Take the battery out of the
power tool and refit it. Switch on the
power tool – if the light emitting
diodes still flash, the power tool is
faulty and must be checked by a
servicing dealer – STIHL
recommends an authorized STIHL
servicing dealer.

Stihl HLA 65 Specifications

General

Brand	Stihl
Model	HLA 65
Category	Trimmer
Language	English